
BSP and NPT are among the most common standards for hydraulic threads used in power hydraulics, pneumatics and industrial installations. Despite their very similar app...
BSP and NPT are among the most common standards for hydraulic threads used in power hydraulics, pneumatics and industrial installations. Despite their very similar appearance, they are not compatible and differ in profile, thread angle and sealing method.
Incorrectly joining BSP and NPT threads can lead to
- hydraulic oil leaks,
- thread damage,
- working pressure drops,
- hydraulic system failure.
What is a BSP thread?
BSP (British Standard Pipe) is a thread standard used mainly in Europe. It is among the most common connection types in power hydraulics.
BSP threads come in two basic versions.
- BSPP — parallel thread,
- BSPT — tapered thread.
For BSPP, the thread secures the components, while sealing takes place outside the thread itself on the intended surface of the fitting or port. Depending on the design, this may involve
- an O-ring,
- a sealing washer,
- a flat gasket.
What is an NPT thread?
NPT (National Pipe Thread) is an American tapered thread standard used mainly in machinery from the USA and industrial installations.
NPT has a tapered thread with a 60° profile. Sealing takes place in the threaded connection using sealing material approved for the particular design and medium. In this respect, it should not be contrasted with the entire BSP family, as BSPT also uses a tapered sealing thread.
Select sealing material according to the connection documentation, medium and operating conditions. Do not use arbitrary tape or adhesive simply because NPT has been identified. Examples permitted in appropriate designs include
- PTFE tape,
- hydraulic thread sealants.
The main differences between BSP and NPT
Although BSP and NPT threads look very similar, they have several important technical differences.
Example of BSPP with a seal under the hexagon. The thread is parallel and the seal is outside the thread. Other BSPP designs may seal on a cone or another seat. The 55° profile is the angle between the flanks, not the sealing cone angle. Thread turns and taper are simplified. The drawing does not define thread tolerances or manufacture.
BSPT has a tapered thread. The connection seals in the thread area with the correct design and sealing agent according to the manufacturer. The 55° profile is the angle between the flanks, not the sealing cone angle. Thread turns and taper are simplified. The drawing does not define thread tolerances or manufacture.
NPT has a tapered thread. The connection seals in the thread area with the correct design and sealing agent according to the manufacturer. The 60° profile is the angle between the flanks, not the sealing cone angle. Thread turns and taper are simplified. The drawing does not define thread tolerances or manufacture.
How do you distinguish BSP from NPT?
The best method is to check
- thread diameter,
- thread pitch,
- thread profile angle,
- sealing method.
A calliper and thread pitch gauge are best used for measurements.
Does BSP fit NPT?
No. Despite their similar appearance, BSP and NPT should not be joined without suitable hydraulic adapters.
Joining these threads can cause
- leaks,
- thread damage,
- dangerous hydraulic oil leaks.
Where are BSP threads most commonly found?
- power hydraulics,
- agriculture,
- construction machinery,
- industrial installations,
- European hydraulic systems.
Where are NPT threads most commonly found?
- machinery imported from the USA,
- American industry,
- pneumatic systems,
- high-pressure installations.
Common mistakes when identifying BSP and NPT
- assessing a thread solely by diameter,
- omitting thread pitch measurement,
- failing to check the thread angle,
- joining BSP to NPT without an adapter,
- using an unsuitable seal.
Frequently asked questions
Do BSP and NPT have the same thread pitch?
Not always. Even if the diameter looks similar, the thread pitch and profile may differ.
Can BSP be connected to NPT?
Yes, but only with a suitable hydraulic adapter.
How do you identify NPT quickly?
An NPT thread is tapered and is most often sealed directly in the thread.
Why do BSP and NPT leak when joined?
Because they differ in thread profile and angle, so they do not form a proper seal.
Summary
BSP and NPT are among the most popular hydraulic thread standards, but are not compatible. When identifying them, pay attention to diameter, pitch, thread angle and sealing method. Correctly identifying the standard helps avoid costly power hydraulic failures.
Related articles
- How to identify a hydraulic thread
- How to measure a hydraulic thread?
- Types of hydraulic threads
- ORFS vs BSP — hydraulic thread differences
- How to seal hydraulic threads?
Related products
- BSP adapters
- NPT adapters
- BSP hydraulic fittings
- Hydraulic quick couplings
- Hydraulic hoses



