
ORFS and BSP are two popular connection standards used in power hydraulics. Although both are found in hydraulic systems, they differ in design, sealing method and typ...
ORFS and BSP are two popular connection standards used in power hydraulics. Although both are found in hydraulic systems, they differ in design, sealing method and typical application.
The O-ring lies in a groove on the male fitting's flat face and presses against the mating fitting's flat surface. The thread pulls the parts together. The drawing omits the nut and thread details to show the sealing location.
Example of BSPP with a seal under the hexagon. The thread is parallel and the seal is outside the thread. Other BSPP designs may seal on a cone or another seat. The 55° profile is the angle between the flanks, not the sealing cone angle. Thread turns and taper are simplified. The drawing does not define thread tolerances or manufacture.
The main difference is that ORFS uses a face seal with an O-ring, while BSP is most often sealed with a washer, gasket or cone.
What is ORFS?
ORFS stands for O-Ring Face Seal, a connection with a face seal using an O-ring. This connection type is used particularly where very high leak-tightness and vibration resistance are required.
ORFS is often found in
- construction machinery,
- mobile hydraulics,
- high-pressure systems,
- forestry machinery,
- installations exposed to vibration.
What is BSP?
BSP, or British Standard Pipe, is one of the most commonly used standards for pipe threads in Europe. In power hydraulics, it is very common in hoses, adapters, quick couplings and hydraulic fittings.
BSP threads can be
- BSPP — parallel thread,
- BSPT — tapered thread.
A BSP connection is most often sealed with a washer, flat gasket, O-ring or thread sealing in the tapered version.
The main differences between ORFS and BSP
ORFS and BSP differ primarily in their sealing method. ORFS uses an O-ring on the face, while BSP may require a washer, gasket or additional thread sealing.
ORFS and BSP comparison
Feature ORFS BSP |
Feature ORFS BSP |
Feature ORFS BSP |
Feature ORFS BSP |
Feature ORFS BSP |
When should you choose ORFS?
ORFS is worth choosing when the hydraulic system operates at high pressure, is exposed to vibration or requires very high leak-tightness.
ORFS is particularly suitable for
- high-pressure systems,
- construction machinery,
- forestry machinery,
- mobile hydraulics,
- systems requiring leakage to be minimised.
When should you choose BSP?
BSP is a very good choice for typical hydraulic, pneumatic and industrial installations. It is a very popular standard in Europe, so BSP adapters, fittings and quick couplings are readily available.
BSP is most commonly used in
- agricultural machinery,
- industrial installations,
- general hydraulics,
- hydraulic hoses,
- hydraulic adapters and fittings.
Are ORFS and BSP compatible?
No. ORFS and BSP are different hydraulic connection standards and must not be joined without a suitable adapter. They differ in sealing method and connection design.
An incorrect connection can lead to
- hydraulic oil leaks,
- thread damage,
- pressure loss,
- hydraulic system failure.
Common mistakes when selecting ORFS and BSP
- confusing sealing methods,
- joining ORFS to BSP without an adapter,
- overlooking the O-ring's condition,
- selecting a fitting solely by diameter,
- overlooking working pressure.
Frequently asked questions
Is ORFS more leak-tight than BSP?
Yes. ORFS usually provides very high leak-tightness thanks to the O-ring on the fitting's face.
Does BSP require Teflon tape?
Not always. BSPP threads are most often sealed with a washer or gasket. PTFE tape may be used for tapered BSPT threads.
How do you identify ORFS?
ORFS can be identified by the O-ring on the connection's face.
Can ORFS be connected to BSP?
Yes, but only with a suitable hydraulic adapter.
Summary
ORFS and BSP are two different hydraulic connection standards. ORFS provides very high leak-tightness through a face seal with an O-ring, while BSP is a popular European standard used in many hydraulic and industrial systems. Always check the thread type, sealing method and required working pressure when selecting components.
Related articles
- Types of hydraulic threads
- How to identify a hydraulic thread
- How to measure a hydraulic thread
- BSP vs NPT — how do the threads differ?
- How to seal hydraulic threads
Related products
- ORFS fittings
- BSP fittings
- Hydraulic adapters
- Hydraulic quick couplings
- Hydraulic hoses
The BSPP example shown with a seal under the hexagon relates to a specific port connection. Not every component with a BSPP thread seals in the same place. Other designs use, for example, a cone or a suitable seat. Compatibility is determined by the full fitting design, not the BSPP marking alone.



