
S235 denotes structural steel, but “S235” alone is not a complete order specification. The suffixes JR, J0 and J2 describe impact-energy requirements in the impact tes...
S235 denotes structural steel, but “S235” alone is not a complete order specification. The suffixes JR, J0 and J2 describe impact-energy requirements in the impact test. The symbols +AR and +N indicate the delivery condition. When buying, you must also establish the standard for the particular product, its dimensions and the required material document.
What do S and 235 mean?
The letter S indicates structural steel. The number 235 refers to the minimum yield strength, expressed in MPa, for a specified product-thickness range. It does not designate hardness or the permissible load of a finished structure.
In the documentation for S235 products according to EN 10025-2, 235 MPa applies to nominal thicknesses up to 16 mm. For greater thicknesses, the required minimum may be lower. Do not automatically assign 235 MPa to every sheet, bar or section solely from the grade name. Check the table for the appropriate standard and size.
S235JR, S235J0 and S235J2 — what is the difference?
JR, J0 and J2 distinguish impact-test requirements. The table below explains the S235 quality-group designations according to EN 10025-2.
Designation Minimum impact energy KV Test temperature |
Designation Minimum impact energy KV Test temperature |
Designation Minimum impact energy KV Test temperature |
These are test requirements for a specified specimen, not temperatures guaranteeing safe operation of an entire structure. The applicable standard determines whether the test applies and the requirements for thin products. Do not select material for a hall, bridge or load-bearing component solely by the weather. Thickness, loads and design documentation also matter.
What do +AR, +N and the letter C mean?
- +AR denotes the delivery condition after rolling, called as rolled.
- +N denotes normalized or normalizing-rolled condition. It does not denote just one method of subsequent annealing.
- C appended to the grade in the context of EN 10025-2 relates to suitability for specified cold-forming operations. It is not an abbreviation for “controlled carbon content guaranteeing weldability”. The scope of this suitability must be agreed for the product and process.
A symbol's meaning depends on its position and the standard. Do not add missing letters based on the material's appearance. Do not treat designations for other steel families and processes, such as thermomechanical rolling, as arbitrary extensions of the S235 name.
Hollow section or sheet — why does the standard matter?
EN 10025-2 covers specified hot-rolled products but excludes structural hollow sections and tubes. Structural hollow-section requirements may instead follow EN 10210-1 or EN 10219-1, depending on the design.
Documentation for such sections uses full designations such as S235JRH. This does not mean that every store product described as S235 has a confirmed JR quality group and EN 10219 standard. In the category of NERON square steel sections check the data sheet for the selected variant. Similarly, when buying hot-rolled steel flat bars read the grade and documentation for the particular item.
Does S235J2 denote corrosion resistance?
No. J2 concerns impact testing, not protection against rust. Weathering grades marked W belong to the separate scope of EN 10025-5. Their behaviour depends on exposure conditions. They are not automatically suitable for every outdoor component. Do not replace required corrosion protection simply by changing JR to J2.
Purchase example — when is “S235 section” insufficient?
Assumption the part drawing requires a particular hollow section, full grade designation, standard and a specified material document. An offer with the matching cross-section and name “S235” confirms only some of the required information. Before purchase, establish whether it meets the remaining requirements too. Do not treat S235, S235JR, S235JRH, S355 or DC01 as substitutes based on a similar shape.
Include the following in your enquiry
- product type, full grade designation and standard from the drawing,
- cross-section, thickness, length and required tolerances,
- delivery condition, if required,
- planned forming, welding and corrosion protection,
- required material document and quantity.
If the data sheet does not provide all the information required by the design, send the specification to NERONto confirm the offered variant's conformity before ordering.



