Bearings · 4 min read · Krzysztof Przewoźniak

An AGRI bearing hub with a round flange and threaded stud on a steel table; an out-of-focus working disc in the background.

Select an AGRI hub for a disc harrow using the full part designation and mounting compatibility with the machine. The housing's appearance, disc diameter or “AGRI” lab...

Select an AGRI hub for a disc harrow using the full part designation and mounting compatibility with the machine. The housing's appearance, disc diameter or “AGRI” label alone do not confirm interchangeability. Before ordering, establish whether you need a complete bearing unit or an individual repair component.

An AGRI hub versus a bearing alone — what are you actually ordering?

In units for independently suspended discs, the hub combines disc attachment with its bearing arrangement and sealing. A complete module is not the same as a loose bearing of similar dimensions. Designs differ in how they connect to the machine arm, their flange and protective components.

This guide discusses selecting a unit for a working disc. These instructions must not automatically be applied to a trailer wheel hub. Even within disc harrows and seed drills, the specific machine model and part design must be checked.

What information should be checked before selecting a disc-harrow hub?

Read the designation on the fitted part and the number in the machine catalogue. Retain every suffix. If the marking is illegible, collect information from both mounting sides and compare it with the drawing of the selected unit. A photograph helps identify the construction but does not replace dimensions.

Check area
Identification

What to record or compare
Manufacturer, full hub designation, part number, and machine model and version

Why it matters
A similar trade name may cover different designs

Check area
Disc attachment

What to record or compare
Number and arrangement of holes, their diameters or full thread designations

Why it matters
The number of bolts alone does not describe the complete joint

Check area
Flange

What to record or compare
Diameter, contact surface and method of locating the disc

Why it matters
The external outline does not confirm matching mounting surfaces

Check area
Connection to the arm

What to record or compare
Axle or bore design, seating diameters and fastening thread

Why it matters
The hub must also fit on the machine side

Check area
Axial dimensions

What to record or compare
Lengths and offsets shown on the drawing, with measurement locations identified

Why it matters
A single overall dimension does not show the disc position

Check area
Conditions and scope of supply

What to record or compare
Disc type and diameter, application, required seals, guards and fasteners

Why it matters
The approved application and completeness of the order must be confirmed

Do not state just “hole spacing” without explaining what was measured. The diameter of the circle through the hole centres and the distance between adjacent hole centres are different dimensions. Include a sketch showing the measurement in your enquiry; mark any uncertain value as requiring verification.

Can a similar hub be a substitute?

Illustrative example: the machine has a five-bolt disc mounting. The proposed substitute looks similar and has a comparable housing diameter, but four holes. This part is not a direct-fit substitute. This is an example of rejecting an incompatible design, not a comparison of specific products.

Even the same number of holes does not complete the check. The other dimensions, threads, application and seating method must be confirmed. In NERON's range, you can view the product pages for the BAA-0012 SKF hub and IL50-98/5T-M22 FKL hub. Include the designation of the part you are interested in with your enquiry; these links do not confirm that the two models are interchangeable.

Does an AGRI hub need lubrication?

There is no single maintenance rule based solely on the word “AGRI”. Manufacturers offer factory-lubricated and sealed units that are not intended for periodic relubrication. In such a design, omitting this operation is a construction feature, not neglect.

Follow the recommendations for the precisely identified model. Do not transfer the lubrication interval from another hub or assume that “maintenance-free” removes the need to inspect the unit and its mounting. Nor is it a guarantee of trouble-free operation under all conditions.

Installation and enquiries to NERON — what should you prepare?

Tightening torque, joint locking and the arrangement of guards or seals must follow the instructions for the particular unit and machine. Do not apply one torque value to all AGRI hubs. Protect exposed surfaces from contamination and avoid striking an uninstalled unit.

Prepare the part designation, machine details, the dimensions described in the table and information about what is missing to confirm compatibility. Current models can be found in the category AGRI bearings and hubs. If the markings or mounting are unclear, send the hub details to NERON for verification before purchasing. A part's presence in this category alone does not mean it fits every disc harrow.

Loading...
Back to top