6/12-5,3 mm EPDM-lined clamp DIN 3016 D1 W1, zinc-plated, 1 pc.

Clamp with EPDM liner — 6/12-5,3 mm
The steel-strip clamp forms a loop around a pipe, line or hose. The EPDM liner separates the secured item from the steel strip. The two lugs are used to bolt the clamp to a suitably selected support. Check the diameter of the item being secured and the permissible operating conditions of the materials.
Sale: 1 piece. Price per piece.

Specifications of the actual variant
- Type: DIN 3016, form D1, version W1.
- Strip material: non-alloy (carbon) steel, electroplated zinc finish.
- Liner: EPDM.
- Nominal diameter d₁: 6 mm.
- Steel strip width b: 12 mm.
- Liner width b₁: 15 mm.
- Hole diameter dₙ: 5,3 mm.
- Steel strip thickness s: 0,6 mm.

The in-house diagram is illustrative and is not manufacturing documentation or confirmation of tolerances. The photographs show a representative design from the family; the actual dimensions for this offer are listed in the specifications.
Scope of supply
One clamp with an EPDM liner. Bolt, nut, washers, pipe and support are not included.
The carton illustrates an example arrangement and does not determine the quantity sold.
Approximate weight
The existing weight field has been retained without new calculations. The weight of the applicable pack has not been confirmed in the current catalogue; this value is not presented as a currently verified weight.
-
ConditionNew
-
StandardDIN 3016 D1
-
Sales unitpiece
-
Number of pieces per pack1
-
MaterialUnalloyed (carbon) steel
-
TypeMounting clamp with EPDM lining
-
Surface treatmentElectroplated zinc
-
Nominal diameter [mm]6
-
Dimension s [mm]0,6
-
Dimension B [mm]12
-
Scope of deliveryClamp without bolt and nut
-
Dimension d1 [mm]6
-
Dimension b1 [mm]15
-
Dimension dn [mm]5,3
-
Material versionW1
-
ShieldEPDM
-
Mass confirmationPrevious mass retained; no current source
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.

Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent