Wedge anchor AN217 M12×100 mm, zinc-plated steel, 2 pcs.
Wedge anchor AN217 M12×100 mm of zinc-plated steel, with nut and washer. Thread M12, length 100 mm. Sale: 1 pack = 2 pcs..

Wedge anchor M12×100 mm — zinc-plated steel
Wedge expansion anchor with nut and washer for fastening components in concrete. Steel shank with metric thread, tapered tip and a short split expansion ring. Designation in the supplier documentation: AN217.
- Thread: M12.
- Nominal length L: 100 mm.
- Material: steel.
- Coating: zinc plating.
- Scope of delivery: 2 pcs., with a nut and washer for each anchor.

Technical specifications
- Thread size: M12.
- Length L: 100 mm.
- Diameter A: 12 mm.
- Dimension F of the expansion section indicated in the drawing: 33,5 mm.
The drawing shows length L, dimension F and anchor diameter A.

Scope of delivery and weight
Sale: 1 pack = 2 pcs.. Approximate weight of this quantity: 0,184 kg (184 g). It was calculated from the weight of the appropriate reference pack: 4,60 kg / 50 pcs. × 2, rounded to a whole gram at the end. This is not a weighing result from Neron.
The images show a representative M10×120 mm variant. The specifications and quantity of this offer are defined in the description. The visualisations do not prove dimensional conformity of an individual item.
-
ConditionNew
-
Sales unitpcs
-
Number of pieces per pack2
-
Materialsteel
-
CoatingZinc plating
-
Length [mm]100
-
Thread sizeM12
-
Dimension F [mm]33.5
-
Surface treatmentWhite electroplated zinc
-
Thread diameter [M]M12
-
Nominal diameter [mm]12
-
Diameter A [mm]12
-
Supplier designationAN217
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.

Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent