Radial shaft seal 16x30x5 RST NBR ERIKS
zł11.36 Grosszł9.24 Net
Radial shaft seal 16x30x5, type RST, double-lip design with dust lip, NBR material, manufacturer ERIKS. Dimensions d×D×b: 16x30x5 mm.

Radial shaft seal 16x30x5 RST NBR ERIKS
Double-lip RST radial shaft seal made of NBR nitrile rubber. The design includes a spring-loaded main sealing lip and an additional dust lip that reduces the ingress of external contaminants.
The main image is a photorealistic illustrative visualization of the RST NBR design.
Key properties
- type: RST — double-lip design with dust lip,
- material: NBR — nitrile rubber,
- outside surface: rubber-coated,
- manufacturer: ERIKS,
- quantity sold: 1 pcs.
Seal dimensions
- inside diameter d: 16 mm,
- outside diameter D: 30 mm,
- width b: 5 mm.

NBR material and operating conditions
NBR is compatible with mineral oils, greases and typical hydraulic fluids. The approximate operating temperature range is from about -30°C to +100°C. Final material compatibility with the medium, temperature, shaft speed and installation conditions must be confirmed for the specific application.
Full product name: Radial shaft seal 16x30x5 RST NBR ERIKS
Workplace safety warnings — in accordance with Regulation (EU) 2023/988 on general product safety:
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.
4 other products in the same category
Radial shaft seal 42x72x10 RST NBR ERIKS
zł5.76 Grosszł4.68 Net
Rated out of 5 stars based on
review(s)
Radial shaft seal 55x90x10 RST NBR ERIKS
zł8.60 Grosszł6.99 Net
Rated out of 5 stars based on
review(s)
Radial shaft seal 128x150x13 RST NBR ERIKS
zł63.80 Grosszł51.87 Net
Rated out of 5 stars based on
review(s)
Pressure-resistant shaft seal 70x90x7 RST-D NBR ERIKS
zł41.15 Grosszł33.46 Net
Rated out of 5 stars based on
review(s)
Viewed products
Hexagon socket head cap screws black M8x30 8.8 DIN 912 PG 5 pcs.
zł3.14 Grosszł2.55 Net
Rated out of 5 stars based on
review(s)
Eye bolt M10x80 DIN 444 zinc-coated property class 8.8 50 pcs.
zł188.00 Grosszł152.85 Net
Rated out of 5 stars based on
review(s)
Toothed belt XL220x9,5 mm 9,5 mm wide Optibelt
zł15.18 Grosszł12.34 Net
Rated out of 5 stars based on
review(s)
10x80 taper pins DIN 1B, uncoated steel - 25 pcs.
zł56.80 Grosszł46.18 Net
Rated out of 5 stars based on
review(s)

Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent