Radial shaft seal 160x190x13 RST NBR ERIKS
zł56.44 Grosszł45.89 Net
Radial shaft seal 160x190x13, type RST, double-lip design with dust lip, NBR material, manufacturer ERIKS. Dimensions d×D×b: 160x190x13 mm.

Radial shaft seal 160x190x13 RST NBR ERIKS
Double-lip RST radial shaft seal made of NBR nitrile rubber. The design includes a spring-loaded main sealing lip and an additional dust lip that reduces the ingress of external contaminants.
The main image is a photorealistic illustrative visualization of the RST NBR design.
Key properties
- type: RST — double-lip design with dust lip,
- material: NBR — nitrile rubber,
- outside surface: rubber-coated,
- manufacturer: ERIKS,
- quantity sold: 1 pcs.
Seal dimensions
- inside diameter d: 160 mm,
- outside diameter D: 190 mm,
- width b: 13 mm.

NBR material and operating conditions
NBR is compatible with mineral oils, greases and typical hydraulic fluids. The approximate operating temperature range is from about -30°C to +100°C. Final material compatibility with the medium, temperature, shaft speed and installation conditions must be confirmed for the specific application.
Full product name: Radial shaft seal 160x190x13 RST NBR ERIKS
Workplace safety warnings — in accordance with Regulation (EU) 2023/988 on general product safety:
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.
4 other products in the same category
Radial shaft seal 8x21x6 RST NBR ERIKS
zł14.28 Grosszł11.61 Net
Rated out of 5 stars based on
review(s)
Radial shaft seal 135x160x15 RST NBR ERIKS
zł27.12 Grosszł22.05 Net
Rated out of 5 stars based on
review(s)
Radial shaft seal 30x62x10 RST NBR ERIKS
zł5.04 Grosszł4.10 Net
Rated out of 5 stars based on
review(s)
Radial shaft seal 40x72x8 RST NBR ERIKS
zł6.48 Grosszł5.27 Net
Rated out of 5 stars based on
review(s)
Viewed products
M24x80 Hexagon head bolt 8.8 uncoated DIN 931 - 1 pcs.
zł15.00 Grosszł12.20 Net
Rated out of 5 stars based on
review(s)
Flange bolt M12x70 property class 10.9 zinc-coated DIN6921
zł3.74 Grosszł3.04 Net
Rated out of 5 stars based on
review(s)
6x40 Unhardened dowel pins ISO 2338 m6, uncoated steel - 100 pcs.
zł51.90 Grosszł42.20 Net
Rated out of 5 stars based on
review(s)
Carriage bolts M10x180 class 4.8 zinc-coated DIN 603 2 pcs.
zł5.23 Grosszł4.25 Net
Rated out of 5 stars based on
review(s)

Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent