SPB 112/3 pulley for Taper Lock 1610 — Hubber
zł83.49 Grosszł67.88 Net
Solid cast-iron pulley, three grooves. D 112 mm, Da 119 mm, B 63 mm. Pulley only. Bushing not included; order it separately. Processing within 48 hours.
SPB 112/3 pulley for Taper Lock 1610 — Hubber
Pulley only. Bushing not included; order it separately.
Choose a Taper Lock 1610 bushing
| Hubber TB 1610/16 Shaft bore: 16 mm | Hubber TB 1610/24 Shaft bore: 24 mm | Hubber TB 1610/32 Shaft bore: 32 mm |
| All 1610 bushing options | ||
Dimensions and specifications
| Datum diameter D | 112 mm |
|---|---|
| Outside diameter Da | 119 mm |
| Rim width B | 63 mm |
| Design and material | Solid cast-iron pulley, three grooves |
| Pulley weight without bushing | 2.200 kg |
| OEM reference | BT01123 |
| Belt section | SPB |
Installation
- Stop the drive and secure the machine against unintended startup.
- Match the 1610 bushing bore to the shaft, check the key and clean mating surfaces.
- Fit the pulley and bushing according to the instructions for the selected bushing. Tighten the screws to the specified torque.
- Check alignment, belt tension and guards before restarting.
The original illustration are for reference only, not for measurement or manufacturing.
-
Width B63 mm
-
Number of grooves3
Workplace safety warnings — in accordance with Regulation (EU) 2023/988 on general product safety:
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.
4 other products in the same category
Viewed products
SPB 132/3 pulley for Taper Lock 2012 — Hubber
zł132.32 Grosszł107.58 Net
Rated out of 5 stars based on
review(s)
SPB 132/3 pulley for Taper Lock 2012 — Optibelt
zł150.51 Grosszł122.37 Net
Rated out of 5 stars based on
review(s)

Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent