Profil stalowy zamknięty kwadratowy 100x100x8 S355J2H - długość 6000 mm
Square steel hollow section 100x100x8 mm, S355J2H, EN 10219. 1 piece is a 6000 mm cut length. Dispatch within 7 days.
Square steel hollow section 100x100x8 mm, S355J2H, EN 10219. 1 piece is a 6000 mm cut length.
Technical specifications
| Type | Cold-formed square steel hollow section |
|---|---|
| Material | Steel |
| Grade | S355J2H |
| Standard | EN 10219 |
| Width a | 100 mm |
| Height a | 100 mm |
| Wall thickness t | 8 mm |
| Length L | 6000 mm |
| Sales unit | 1 piece |
Drawing and dimensional symbols
The sides of the square cross-section are labelled a, the wall thickness t and the length L.
Section applications
The section can be used as semi-finished stock for frames and supports. Load-bearing requirements and joining methods must be determined for the specific design.
Questions and answers
How long is one piece?
6000 mm.
What are the cross-section dimensions?
Sides 100 mm, nominal wall thickness 8 mm.



Weight
Nominal or approximate weight of the entire item sold: 128,34 kg. This is not a measured material weight or a weight including packaging.
Delivery
Dispatch within 7 days. The availability and cost of delivery methods depend on the address, quantity and total order weight.
-
StandardEN 10219
-
Sales unitpcs
-
MaterialSteel S355J2H
-
TypeSquare steel hollow section
-
Length [mm]6000
-
Number of pieces per sales unit1
-
Wall thickness8
-
Product width100
-
Product height100
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.

Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent