KR 19 PP Needle roller follower SKF 8x19x11 mm - 1 pcs.
KR 19 PP SKF roller with concentric stud. Main dimensions: 8 × 19 × 11 mm. Sales unit: 1 pcs.
Needle roller follower KR 19 PP SKF
KR 19 PP SKF roller with concentric stud. Main dimensions: 8 × 19 × 11 mm.

Design
Roller with concentric stud. Cage: steel, rolling-element-guided. Sealing: plastic contact seals on both sides. Grease lubrication.
Sales unit
One sales unit contains 1 roller KR 19 PP SKF.

Dimensions
d — stud diameter: 8 mm.
D — outside diameter: 19 mm.
C — outer ring width: 11 mm.
Catalogue parameters
Dynamic load rating C: 3300 N.
Static load rating C0: 3800 N.
Limiting speed: 5600 rev./min.
The diagram shows catalogue overall dimensions and is not a production drawing.
Questions and answers
Which variant does the offer cover?
The offer is for an SKF KR 19 PP roller with concentric stud.
What dimensions does the roller have?
The stud diameter is 8 mm, outside diameter 19 mm and outer ring width 11 mm.
What mass is specified by the supplier?
The supplier specifies a mass of 0,04 kg for this variant.
What does one sales unit contain?
One sales unit contains 1 roller KR 19 PP SKF.
-
Sales unit1 pc
-
DesignWith concentric stud
-
Component typeStud-type needle roller
-
ManufacturerSKF
-
Manufacturer designationKR 19 PP
-
SeriesKR
-
Country of origin according to supplierJapan
-
CageSteel, guided on rolling elements
-
SealPlastic contact seals on both sides
-
D — outside diameter19 mm
-
C — outer ring width11 mm
-
LubricationGrease
-
d — stud diameter8 mm
-
Static load rating C03800 N
-
Limiting speed5600 rpm
-
Dynamic load rating C3300 N
-
Mass according to supplier0,04 kg
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.

Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent