M10 Pronged T-nuts AN 90 zinc-coated steel 2000 pcs.
Pronged T-nuts AN 90 M10, steel with a white zinc coating. Four prongs, overall height h = 12 mm, barrel d2 = 12 mm, flange d3 = 25 mm and g = 1,8 mm. Price per pack of 2000 pieces. Catalogue weight of the full pack 16,92 kg.

Pronged T-nuts AN 90 M10 — zinc-coated steel, 2000 pieces
Nut with a threaded cylindrical barrel, a wide flange and four prongs. The prongs face the same side of the flange as the barrel. It allows a thread to be installed in wood and wood-based materials; the joint must suit the material and its thickness.
Technical specifications
- Catalogue designation: AN 90
- Nut type: Pronged T-nut
- Internal thread d1: M10
- Overall height h: 12 mm (including flange)
- Shank diameter d2: 12 mm
- Flange diameter d3: 25 mm
- Flange thickness g: 1,8 mm
- Number of prongs: 4
- Material: Steel
- Coating: White zinc plating
- Quantity per pack: 2000 pcs.
- Sales unit: pack
- Catalogue weight of the full pack: 16,92 kg
Height h = 12 mm includes the flange. Flange thickness g = 1,8 mm is part of this dimension. d2 = 12 mm denotes the outside diameter of the barrel, and d3 = 25 mm the outside outline of the flange.

Material and installation
Steel with a white zinc coating. The body with thread M10 is inserted into a prepared hole, and the four prongs are seated in the material at the flange. Before use, check the hole selection and installation method on the relevant material. The barrel diameter alone does not determine the drilling diameter.

Scope of delivery
The price includes 2000 nuts AN 90 M10.
The catalogue weight of this exact full pack of 2000 pieces is 16,92 kg. This applies to the entire pack, not a single nut.
Our own illustrations depict the product family, not the number of pieces supplied or a proportionally scaled photograph of each size. The diagram contains shared dimension callouts; the exact values for this variant are listed in the specifications. The catalogue diagram is not manufacturing documentation.
Frequently asked questions
How many pieces does the price include?
Pack of 2000 pronged T-nuts AN 90 M10.
Does the height of 12 mm include the flange?
Yes. Dimension h is the overall height and includes flange thickness g = 1,8 mm.
How are the prongs arranged?
The four prongs are bent towards the side of the flange on which the threaded barrel is located.
Is d2 = 12 mm the mounting hole diameter?
No. This is the outside diameter of the barrel. The hole must suit the material and installation method.
-
Sales unitpack
-
MaterialSteel
-
CoatingWhite zinc plating
-
Quantity per pack2000 pcs
-
Thread pitch1,5 mm
-
Thread diameterM10
-
Catalogue designationAN 90
-
Catalogue mass of full pack16,92 kg
-
Nut typePronged
-
Overall height h12 mm (including flange)
-
Stud diameter d212 mm
-
Flange diameter d325 mm
-
Flange thickness g1,8 mm
-
Number of claws4
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.

Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent