Asymmetric cold-formed steel channel 45x15x12x2 mm Neron 2 m
Asymmetric cold-formed Neron steel channel 45×15×12×2 mm. Base 45 mm, legs 15 and 12 mm, thickness 2 mm.
61,00 zł gross for 1 section 2 m long (30,50 zł/mb). Fulfilment: 1 day. DC01 steel, unfinished, without coating. Theoretical section mass: approx. 2,14 kg.
Asymmetric cold-formed steel channel 45×15×12×2 mm
The channel by Neron has a 45 mm base, two unequal legs of 15 mm and 12 mm, and a material thickness of 2 mm. The open U-section is made by cold bending DC01 steel. Unfinished surface, without a coating.
One piece in the basket means one section 2 m (2000 mm) long. The gross price of 61,00 zł covers the entire 2 m section, equivalent to 30,50 zł gross per running metre. Fulfilment time: 1 day.

Dimensions and specifications
| Product type | Cold-formed steel channel |
|---|---|
| Brand | Neron |
| Material | Steel |
| Cross-section shape | U, asymmetric, unequal legs |
| Base B [mm] | 45 |
| Leg C1 [mm] | 15 |
| Leg C2 [mm] | 12 |
| Thickness D [mm] | 2 |
| Length L [mm] | 2000 |
| Sales unit | 1 section 2 m long |
| Steel grade | DC01 |
| Coating | None — unfinished steel |
| Mass of a 2 m section | approx. 2,14 kg — theoretical |
Theoretical mass
Approximately 2,14 kg per 2 m section. A steel density of 7850 kg/m³ and a simplified cross-section were assumed: A = D × (B + C₁ + C₂ − 2D) = 136 mm². Mass = 136 × 2000 × 0,00000785 = 2,1352 kg, rounded to approximately 2,14 kg. The calculation does not include a correction for bending radii. Actual mass may vary. This is not a weighing result.
Asymmetric cross-section
The legs have different heights: C₁ = 15 mm and C₂ = 12 mm. Before selecting for an enclosure or connection, check which side requires the higher leg.

Drawing labels
- B — base 45 mm
- C₁ — higher leg 15 mm
- C₂ — lower leg 12 mm
- D — material thickness 2 mm
- L — section length 2000 mm.

The drawing and photorealistic visualisations were developed from product photographs and dimensions. They are catalogue illustrations. The drawing is not production documentation.
Selection and applications
The section can be considered when selecting mounting components, surrounds and enclosures if its cross-section and material meet the project requirements. Selection for loaded applications requires checking steel grade, operating conditions and required load capacity.
Frequently asked questions
Is the price for 1 m or the entire section?
The gross price of 61,00 zł covers one 2 m section. This is equivalent to 30,50 zł gross per 1 running metre.
Are both legs the same?
No. Leg C₁ is 15 mm and leg C₂ is 12 mm. Base B is 45 mm.
What do I receive when ordering one piece?
One channel 2000 mm long, meaning 2 m. Ordering two pieces means two sections of 2 m each.
What is the material and how was the mass determined?
The channel is made from DC01 steel in an unfinished condition without a coating. The mass of approximately 2,14 kg per 2 m section is a theoretical value calculated from nominal dimensions. It is not a weighing result.
-
Sales unit1 section 2 m
-
MaterialSteel
-
CoatingNone — unfinished steel
-
Length L [mm]2000
-
BrandNeron
-
Product typeCold-formed steel channel
-
Steel gradeDC01
-
Cross-section shapeU, asymmetric, unequal legs
-
Base B [mm]45
-
Leg C1 [mm]15
-
Leg C2 [mm]12
-
Thickness D [mm]2
-
Mass of 2 m sectionapprox. 2,14 kg — theoretical
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.

Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent