4x22 Coiled spring pins ISO 8750/DIN 7343, black steel, 100 pcs.

4x22 Coiled spring pins ISO 8750/DIN 7343, black steel, 100 pcs.
Standard-duty coiled spring pins are used to locate, join and secure machine parts. The coiled steel strip forms an elastic spiral cross-section that adapts to the mounting hole.
Technical specifications
- Standard: ISO 8750, formerly DIN 7343.
- Design: coiled, standard-duty.
- Nominal size: 4×22 mm.
- Nominal diameter d1: 4 mm.
- Length l: 22 mm.
- Outside diameter before installation: 4,20–4,40 mm.
- Chamfered end diameter d2: 3,90 mm according to the pre-installation dimensions table.
- Strip thickness s: 0,33 mm.
- Chamfer length a: 1,10 mm.
- Material: hardened and tempered spring steel.
- Finish: uncoated, black surface.
- Quantity per pack: 100 pcs.

Installation and scope of delivery
The recommended mounting hole has a nominal diameter of 4 mm and tolerance grade H12. Insert the pin axially. Select the joint and installation method to suit the component material and the loads.
Sales unit: 1 full pack containing 100 pieces. The price is for the full pack.

Pack weight
Approximate catalogue weight of the corresponding full pack of 100 pieces: 0,14 kg. This is the catalogue weight of this pack; it is not the result of weighing by NERON or multiplying the rounded weight of a single piece.
The images illustrate the design of the coiled pin family. The size and quantity offered are specified in the parameters above. The drawing is for illustration only.
-
StandardISO 8750 (DIN 7343)
-
Sales unitpack
-
MaterialHardened spring steel
-
Length [mm]22
-
Diameter [mm]4
-
CoatingUncoated
-
Quantity per pack100 pcs
-
Pack mass0,14 kg
-
Diameter before installation4,20–4,40 mm
-
Chamfer1,10 mm
-
DesignCoiled, standard
-
Strip thickness0,33 mm
-
Chamfered end diameter3,90 mm
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.

Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent