Sprocket plate 08A-1 (40-1) Z42 without hub, unhardened — Noname
Single-row sprocket plate 08A-1 Z42 (40-1) without hub, unhardened, made of carbon steel. Shop brand: Noname. Pitch 12,7 mm (1/2 inch), bore d = 20 mm, outside diameter De = 176,5 mm and tooth width B = 7,4 mm. Product weight 1,200 kg. Sold from 1 piece, fulfilment within 48 hours.
Noname sprocket plate 08A-1 (40-1) Z42 without hub — unhardened teeth
Single-row Noname sprocket plate for 08A-1 (40-1) roller chain with a pitch of 12,7 mm (1/2 inch). This variant has 42 teeth, is made of carbon steel and has unhardened teeth. Its flat design without a hub distinguishes it from a standard hubbed sprocket and a sprocket for a Taper Lock bush.
Key specifications
- Chain series: 08A-1 (40-1), single row.
- Number of teeth: 42.
- Design: sprocket plate without hub, unhardened teeth.
- Material: carbon steel.
- Bore diameter: 20 mm.
- Available from 1 piece; fulfilment within 48 hours.
Nominal dimensions
| Parameter | Value |
|---|---|
| Pitch P | 12,7 mm (1/2 in) |
| Number of teeth z | 42 |
| Pitch diameter Dp | 169,94 mm |
| Outside diameter De | 176,5 mm |
| Bore diameter d | 20 mm |
| Tooth width B | 7,4 mm |
| Product weight | 1,200 kg |
Selection and applications
The plate is a component of a single-row chain drive. When selecting it, compare the chain designation 08A-1 (40-1), pitch, tooth count, diameters and tooth width. Also check the mounting arrangement in your design — the plate has no hub or seat for a Taper Lock bush.
It can be used to build and service chain drives in industrial machinery and equipment after confirming dimensional and mounting compatibility. Matching the pitch alone does not replace checking the entire connection.
Frequently asked questions
Which chain is the sprocket plate intended for?
For single-row roller chain 08A-1 (40-1) with a pitch of 12,7 mm, after checking the system dimensions.
Does the sprocket plate have a hub?
No. This is a flat sprocket without a hub, rather than a hubbed sprocket or one for Taper Lock.
Are the teeth hardened?
No, this variant has unhardened teeth. We do not state an unconfirmed numerical hardness or steel grade.
Does the 20 mm bore provide a ready-to-use shaft connection?
The nominal bore diameter is 20 mm. Before installation, the required fit and mounting method must be confirmed; the product data specify neither the bore tolerance nor a finished keyway.
What are the minimum quantity and fulfilment time?
Available from 1 piece. Fulfilment within 48 hours; this does not guarantee the parcel delivery time.
The main image is an original photorealistic visualization shared by the unhardened plates in series 08A-1 (40-1); appearance and tooth count may differ between variants. Select the product by its designation and data table. The drawing with labels d, De, Dp and B is illustrative, with a simplified tooth profile; dimensions are given above. It is not manufacturing documentation.
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.

Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent