Straight split pins DIN 94 6,3x25 mm, zinc-plated steel, 250 pcs.
Straight split pins DIN 94 / ISO 1234 6,3×25 mm, zinc-plated steel. Sales quantity: 250 pieces.

Straight split pins DIN 94 — 6,3×25 mm
Straight split pins made of zinc-plated steel for securing pins, castellated nuts and other connections with a split-pin hole. They consist of a bent rod with a semicircular cross-section, an eye and two legs of different lengths. After insertion, the ends are bent apart to limit withdrawal of the component.
- Standard: DIN 94 / ISO 1234.
- Nominal size: 6,3×25 mm.
- Material: steel.
- Coating: zinc plating.
- Sales quantity: 250 pieces.

Technical specifications
- Nominal diameter [mm]: 6,3.
- Length L [mm]: 25.
- Difference in end lengths a max. [mm]: 4.
- Approximate eye dimension b [mm]: 12,6.
- Eye diameter c min. [mm]: 10,3.
- Eye diameter c max. [mm]: 11,8.
- Split-pin diameter d min. [mm]: 5,7.
- Split-pin diameter d max. [mm]: 5,9.
The nominal diameter determines hole selection, while d in the drawing denotes the actual split-pin diameter. L is the length according to the drawing, excluding the eye; a denotes the difference in leg lengths, b the approximate eye dimension and c its outside diameter. The shape of the ends may depend on the manufacturer's design.

Scope of delivery and weight
The offer includes 250 split pins 6,3×25 mm. Approximate weight of this quantity: 1,76 kg (1760 g). The catalogue weight of the appropriate full reference pack is stated, rounded in the source to 0,01 kg. This is not the result of weighing the product at Neron.
The images show a representative 5×40 mm variant. The size and quantity of this offer are specified by the parameters above. The visualisations and catalogue drawing do not constitute proof that a particular item complies dimensionally with the standard.
-
ConditionNew
-
StandardDIN 94 / ISO 1234
-
Sales unitpack
-
Number of pieces per pack250
-
Materialsteel
-
CoatingZinc plating
-
Nominal diameter [mm]6.3
-
Length L [mm]25
-
Difference in end lengths a max. [mm]4
-
Eye dimension b approximate [mm]12.6
-
Eye diameter c min. [mm]10.3
-
Eye diameter c max. [mm]11.8
-
Split pin diameter d min. [mm]5.7
-
Split pin diameter d max. [mm]5.9
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.

Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent