8x360 Wood screws with countersunk head Torx TX40, yellow zinc plating - 5 pcs.
Wood screws 8×360 mm with a countersunk head and TORX TX40 drive, yellow zinc plated. One pack contains 5 pieces.

Wood screws 8×360 mm — TORX TX40
Wood screws 8×360 mm with a countersunk head and TORX TX40 drive, yellow zinc plated. One pack contains 5 pieces.
Parameters
| Nominal diameter d | 8 mm |
|---|---|
| Overall length l | 360 mm |
| Head | countersunk |
| Drive | TORX TX40 |
| Condition | hardened |
| Coating | yellow zinc plating |
| Intended use | wood and boards |
| Number of pieces in pack | 5 |
| Sales unit | pack |

Scope of supply
The price covers one pack containing 5 screws. The illustrations show the product family; the quantity and size are specified in the parameters of this offer.

Dimensions
d = 8 mm — nominal screw diameter.
l = 360 mm — overall length, including the countersunk head.
The diagram shows the product family. Other labels do not constitute a declaration of dimensions that are not specified.
Questions and answers
How many pieces does the price include?
The price covers one pack containing 5 pieces.
Which bit fits the screw?
The drive requires a TORX TX40 bit.
What does the screw length mean?
The overall length is measured from the top face of the countersunk head to the tip of the screw.
How do I select a screw for the joint?
Select the size and length to suit the parts being joined. Selection for the loads and installation conditions requires appropriate documentation and assessment of the joint.
-
ConditionNew
-
Sales unitpack
-
MaterialSteel
-
CoatingYellow zinc coating
-
Length [mm]360
-
Source referenceKAT60928
-
Thread length [mm]100
-
Diameter [mm]8
-
Drive typeTorx TX40
-
Head shapeTapered
-
Head diameter [mm]15
-
Product range designationAN112
-
Quantity per pack5 pcs
-
Designhartowane
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.

Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent