M4 Round press-in nut, zinc-coated steel, 0,9–1,0 mm, 250 pcs.

Round press-in nut M4 for sheet thickness 0,9–1,0 mm
Steel threaded component for installation in a suitably prepared sheet-metal hole. The design has a round flange and a narrower neck with longitudinal knurling. The internal thread allows use of an M4 metric screw. Selection requires matching the thread, material thickness range and hole diameter; the installation method and tools must suit the particular joint.
Specifications of the particular variant
- Thread d₁: M4, metric, right-hand.
- Material: steel.
- Coating: electroplated zinc.
- Sheet thickness range: 0,9–1,0 mm.
- Mounting hole diameter: Ø6,95 mm.
- Knurled neck diameter d₂: 6,9 mm.
- Flange diameter d₃: 9,5 mm.
- Dimension m according to the diagram: 3,8 mm.
- Thread pitch P: 0,7 mm.
- Sales unit: 1 full pack = 250 pieces.

Scope of delivery
The pack contains 250 nuts of the specified variant. The price is for the whole pack. The carton illustration shows an example arrangement and does not define the quantity sold.
Dimensional diagram

Our own illustrative diagram shows the dimension symbols of the round design. Dimension m does not include the protruding knurled neck. The diagram is neither manufacturing documentation nor confirmation of tolerances. The images show a representative design; the actual specifications for this variant are stated above.
Approximate weight
Approximate weight of the pack of 250 pieces: 500 g (0,5 kg). Basis: catalogue weight 2 g/pc. × 250 pieces. Rounded to a whole gram at the end. This is not a measurement performed by NERON.
-
ConditionNew
-
Sales unitpack
-
Number of pieces per pack250
-
MaterialSteel
-
TypeRound press-in nut
-
Surface treatmentElectroplated zinc
-
Thread diameter [M]M4
-
Approximate pack mass [g]500
-
Dimension d3 [mm]9,5
-
Minimum sheet thickness [mm]0,9
-
Maximum sheet thickness [mm]1,0
-
Dimension m [mm]3,8
-
Thread directionRight-hand
-
Mounting hole diameter [mm]6,95
-
Dimension d2 [mm]6,9
-
Dimension P [mm]0,7
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.

Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent