M8x25 Headless set screws DIN 916 / ISO 4029, A2 stainless steel - 5 pcs.
Stainless steel headless set screws DIN 916 / ISO 4029 M8×25 mm with 4 mm hexagon socket and cup point. A2 steel. Sales unit: 1 pack = 5 pcs.

M8x25 Headless set screws DIN 916 / ISO 4029, A2 stainless steel - 5 pcs.
DIN 916 / ISO 4029 headless set screws have a hexagon socket and a cup point. The annular edge of the point presses against the mating part surface and helps secure its position without a protruding head.
Key specifications
- type: headless set screw with cup point,
- standard: DIN 916 / ISO 4029,
- thread d: M8,
- length l: 25 mm,
- thread pitch P: 1,25 mm,
- point diameter dz: 4,7–5 mm,
- hexagon socket s: 4 mm,
- material: A2 stainless steel,
- sales unit: 1 pack = 5 pcs.

Applications
For clamping and locating components in machine joints, including hubs, bushes and rings. Tighten the set screw with a 4 mm hex key. The cup point edge may leave a mark on the clamped surface. Select the fastener, insertion depth and tightening torque to suit the joint design.

Scope of delivery and weight
One pack contains 5 stainless steel headless set screws M8 × 25 mm DIN 916 / ISO 4029.
Approximate weight of the quantity sold (5 pcs.): 0,034 kg (34 g). Calculated proportionally from the weight of the reference pack for the same size; rounded to whole grams.
-
ConditionNew
-
Sales unitpack
-
Length [mm]25
-
Source referenceKAT19438_n
-
Thread diameter [M]M8
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.

Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent