M8x12 Headless set screws DIN 916 / ISO 4029, A2 stainless steel - 50 pcs.
Stainless steel headless set screws DIN 916 / ISO 4029 M8×12 mm with 4 mm hexagon socket and cup point. A2 steel. Sales unit: 1 pack = 50 pcs.

M8x12 Headless set screws DIN 916 / ISO 4029, A2 stainless steel - 50 pcs.
DIN 916 / ISO 4029 headless set screws have a hexagon socket and a cup point. The annular edge of the point presses against the mating part surface and helps secure its position without a protruding head.
Key specifications
- type: headless set screw with cup point,
- standard: DIN 916 / ISO 4029,
- thread d: M8,
- length l: 12 mm,
- thread pitch P: 1,25 mm,
- point diameter dz: 4,7–5 mm,
- hexagon socket s: 4 mm,
- material: A2 stainless steel,
- sales unit: 1 pack = 50 pcs.

Applications
For clamping and locating components in machine joints, including hubs, bushes and rings. Tighten the set screw with a 4 mm hex key. The cup point edge may leave a mark on the clamped surface. Select the fastener, insertion depth and tightening torque to suit the joint design.

Scope of delivery and weight
One pack contains 50 stainless steel headless set screws M8 × 12 mm DIN 916 / ISO 4029.
Approximate weight of the quantity sold (50 pcs.): 0,140 kg (140 g). Calculated proportionally from the weight of the reference pack for the same size; rounded to whole grams.
-
ConditionNew
-
Sales unitpack
-
Length [mm]12
-
Source referenceKAT27524_n
-
Thread diameter [M]M8
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.

Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent