M24x240 Hexagon head bolt 8.8 zinc-plated DIN 933 - 10 pcs.
M24x240 DIN 933 bolt, full-length thread, class 8.8 steel, white zinc electroplating. Pack of 10 pieces, net mass 8,42 kg.

M24x240 hexagon head bolt 8.8 zinc electroplated DIN 933 - 10 pcs.
M24x240 bolt with a hexagon head and full-length thread, made from class 8.8 steel and protected by white zinc electroplating. It is intended for bolted connections in structures, machines, equipment and assembly work according to the requirements of the specific application.
Surface: zinc electroplating forms a protective layer that limits steel corrosion under typical conditions of use. For environments with greater corrosive aggressiveness, select protection suited to the operating conditions.
Key specifications
- size: M24x240,
- property class: 8.8,
- standard: DIN 933,
- equivalent standard: ISO 4017,
- material: steel,
- surface: white zinc electroplating,
- thread type: full-length, coarse metric,
- number of pieces per pack: 10.

Dimensions
- nominal thread diameter d: M24,
- length l: 240 mm,
- head height k: 15 mm,
- width across flats s: 36 mm,
- thread pitch P: 3 mm.

Standard and selection
DIN 933 specifies hexagon head bolts with full-length thread. DIN 933 was superseded by ISO 4017. When selecting a component for an existing connection, also check the requirements of the structural documentation.
Scope of supply
One sales pack contains 10 M24x240 bolts. Nuts and washers are not included.
Net mass of 10 bolts: 8,42 kg. The value excludes packaging.
-
ConditionNew
-
Standard933/4017
-
Sales unitpcs
-
Length [mm]240
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.

Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent