M12x50 Brass hexagon head bolt DIN 933 - 1 pcs. images
M12x50 Brass hexagon head bolt DIN 933 - 1 pcs.
zł11.70 Grosszł9.51 Net
Brass M12x50 DIN 933 bolt, full thread, without additional coating. Pack of 1 pieces, net weight 0,058 kg.
M12x50 Brass hexagon head bolt DIN 933 - 1 pcs.
M12x50 hexagon head bolt with a full-length thread, made of brass with a natural finish and no additional coating. Intended for bolted joints in installations, equipment and assembly work, subject to the requirements of the application.
Brass provides good corrosion resistance under typical conditions as well as electrical conductivity. When selecting the fastener, consider the required load capacity, chemical environment and possible galvanic corrosion in contact with other metals.
Key specifications
- size: M12x50,
- standard: DIN 933,
- equivalent standard: ISO 4017,
- material: brass,
- surface finish: without additional coating,
- thread type: full-length, metric coarse thread,
- pieces per pack: 1.
Dimensions
- nominal thread diameter d: M12,
- length l: 50 mm,
- head height k: 7,5 mm,
- width across flats s: 19 mm,
- thread pitch P: 1,75 mm.
Standard and selection
DIN 933 specifies hexagon head bolts with a full-length thread. DIN 933 has been replaced by ISO 4017. When selecting a fastener for an existing joint, also check the requirements in the engineering documentation.
Scope of delivery
One retail pack contains 1 M12x50 bolt. Nuts and washers are not included.
Net weight of 1 bolt: 0,058 kg. This excludes the packaging.
-
Brand
-
ReferenceDIN933-MOS-M12X50-1
-
Waga0,058 kg
-
In stock1000 Items
-
ConditionNew
-
Standard933/4017
-
Sales unitpcs
-
Length [mm]50
Workplace safety warnings — in accordance with Regulation (EU) 2023/988 on general product safety:
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.
4 other products in the same category
M8 Pronged T-nut AN 90 zinc-coated steel 500 pcs.
zł134.30 Grosszł109.19 Net
Rated out of 5 stars based on
review(s)
M4x12 Stainless steel A2 hexagon head bolt DIN 933 - 250 pcs.
zł34.00 Grosszł27.64 Net
Rated out of 5 stars based on
review(s)
Viewed products
Female blanking cap 1 1/16” JIC J608-12
zł9.50 Grosszł7.72 Net
Rated out of 5 stars based on
review(s)
- Currently out of stock
Cooling and lubricating fluid S-60 Johansson 400 ml
zł86.10 Grosszł70.00 Net
Rated out of 5 stars based on
review(s)
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent