M12x140 Stainless steel A2 hexagon head bolt DIN 931 - 1 pcs.

M12x140 Stainless steel A2 hexagon head bolt DIN 931 - 1 pcs.
M12x140 hexagon head bolt with a partial thread, made of stainless steel designated A2, with a natural finish and no additional coating. The smooth shank under the head allows the unthreaded part of the bolt to pass through the joined components.
A2 stainless steel is used in typical atmospheric conditions and where intermittent contact with moisture occurs. For exposure to chlorides, seawater, acids or other aggressive media, check the required material resistance; grade A4 or another special design may be appropriate.
Key specifications
- size: M12x140,
- standard: DIN 931,
- equivalent standard: ISO 4014,
- material: A2 stainless steel,
- surface finish: without additional coating,
- thread type: partial, metric coarse thread,
- pieces per pack: 1.

Dimensions
- nominal thread diameter d: M12,
- length l: 140 mm,
- minimum thread length b: 36 mm,
- head height k: 7,5 mm,
- width across flats s: 19 mm,
- thread pitch P: 1,75 mm.

Standard and selection
DIN 931 specifies hexagon head bolts with a partial thread. The equivalent standard is ISO 4014. When selecting a fastener for an existing joint, check the required thread length and the engineering documentation.
Scope of delivery
One retail pack contains 1 M12x140 bolt. Nuts and washers are not included.
Net weight of 1 bolt: 0,133 kg. This excludes the packaging.
-
ConditionNew
-
StandardOther standard
-
Sales unitpcs
-
Length [mm]140
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.

Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent