M10x16 low cylindrical-head hexagon socket screw 8.8 zinc-plated DIN 6912 - 3 pcs.

M10x16 low cylindrical-head hexagon socket screw 8.8 zinc-plated DIN 6912 - 3 pcs.
The screw M10x16 according to DIN 6912 has a low cylindrical head, an internal hexagon socket and a pilot bore on the socket axis. The version made of steel of class 8.8 with zinc plating is suitable for assembly joints requiring a lower head height and enhanced corrosion protection under typical conditions.
Important: zinc plating means a metallic protective coating on a steel component. Suitability for the operating environment must be confirmed for the specific application.
Key specifications
- size: M10x16,
- standard: DIN 6912,
- property class: 8.8,
- material: steel,
- surface: zinc plating,
- head type: low cylindrical head,
- socket: internal hexagon with pilot bore,
- thread: metric coarse thread, full length for this length,
- number of pieces per pack: 3.

Dimensions
- nominal thread diameter d: M10,
- thread pitch P: 1,5 mm,
- length beneath the head l: 16 mm,
- reference thread length b: 26 mm,
- head diameter dk max.: 16 mm,
- head height k max.: 6,5 mm,
- socket size s: 8 mm.

Standard and selection
DIN 6912 describes screws with a low cylindrical head, hexagon socket and pilot bore. During selection, check the requirements of the design documentation, property class and corrosive conditions.
Scope of delivery
One sales pack contains 3 screws M10x16. Nuts and washers are not included in the set.
Net weight of 3 screws: 0,047 kg. This value excludes packaging.
-
Sales unitpack
-
Length [mm]16
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.

Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent