8x70 Standard-duty coiled spring pins ISO 8750 (DIN 7343), black steel - 1 pcs.

8x70 Standard-duty coiled spring pins ISO 8750 (DIN 7343), black steel - 1 pcs.
Standard-duty coiled spring pins are used to locate, join and secure machine parts. The multi-layer, spirally coiled wall adapts elastically to the hole, distributes pressure over a larger area and helps absorb shock loads and vibration.
Key specifications
- type: coiled spring pin, standard-duty design,
- standard: ISO 8750 (formerly DIN 7343),
- nominal size: 8x70 mm,
- nominal diameter d1: 8 mm,
- length l: 70 mm,
- material: hardened high-carbon spring steel,
- finish: uncoated, black and lightly oiled surface,
- sales unit: 1 pack = 1 pcs..

Dimensions and installation
- d1 before installation: 8,3-8,63 mm,
- chamfered end diameter d2: max. 7,8 mm,
- strip thickness s: approximately 0,67 mm,
- chamfer length a: approximately 2 mm,
- recommended mounting hole: 8-8,15 mm,
- minimum double-shear strength: 39 kN.
Insert the pin axially into a correctly prepared hole. Select the fit, insertion depth and installation method to suit the component material and the loads acting on the joint.

Scope of delivery and weight
One pack contains 1 pcs. standard-duty coiled spring pins ISO 8750 8x70 mm.
Weight calculated for the sales quantity: 0,017 kg (17 g). The value was calculated from the documented weight of one piece of the relevant size and material, multiplied by the number of pieces in the pack; the result was rounded to the nearest whole gram as required by the shop system.
-
ConditionNew
-
StandardISO 8750
-
Sales unitpcs
-
Length [mm]70
-
Surface treatmentUncoated
-
Diameter [mm]8
-
Quantity per pack1 pc
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.

Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent