8x40 Hardened dowel pins DIN 6325 m6, ground steel - 2 pcs.

8x40 Hardened dowel pins DIN 6325 m6, ground steel - 2 pcs.
Hardened DIN 6325 dowel pins are used for accurate locating, centring and joining of machine parts, fixtures and tooling. The solid cylindrical body is hardened and precision-ground, allowing use in joints requiring repeatable positioning.
Key specifications
- type: hardened and ground dowel pin,
- standard: DIN 6325,
- nominal size: 8x40 mm,
- nominal diameter d: 8 mm,
- length l: 40 mm,
- diameter tolerance zone: m6,
- material: hardened tool steel,
- surface finish: precision-ground, uncoated,
- sales unit: 1 pack = 2 pcs..

Dimensions and installation
- d m6: 8 mm,
- l: 40 mm,
- l2: 1,8 mm,
- z1: 1,2 mm,
- z2: 0,8 mm,
- material hardness: approximately 60 ±2 HRC.
Insert the pin axially into a correctly machined hole. The short centring section facilitates initial pressing. Combined with a locating hole H7, tolerance zone m6 may form a transition fit; final fit selection should follow the engineering documentation for the joint.

Scope of delivery and weight
One pack contains 2 hardened dowel pins DIN 6325 8x40 mm.
Calculated weight of the quantity sold: 0,032 kg (32 g). The value was calculated from the documented weight of 15,78 g for one 8x40 mm pin and rounded to the nearest whole gram required by the shop system.
-
ConditionNew
-
StandardDIN 6325
-
Sales unitpack
-
Length [mm]40
-
Surface treatmentUncoated
-
Diameter [mm]8
-
Quantity per pack2 pcs
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.

Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent