6x20 Open-end blind rivets ISO 15979, steel/steel - 250 pcs.

zł66.30 Grosszł53.90 Net
(zł0.27 szt.)
Open-end blind rivets ISO 15979 6x20 mm with steel body and steel mandrel. Grip range 10-14 mm. Sales quantity: 250 pcs.
Dispatch within:
3 days
Shipping cost incl. VAT:
from zł8.61
Availability:
Available
Weight:
2,16 kg
Secure payments
BLIK Przelewy24

Delivery with our partners

InPost Paczkomaty GLS DHL Pocztex

Available options depend on the products and delivery address.

Share

6x20 Open-end blind rivets ISO 15979, steel/steel - 250 pcs.

6x20 Open-end blind rivets ISO 15979, steel/steel - 250 pcs.

Open-end blind rivets ISO 15979 are used to join sheet metal and thin-walled components from one side. The steel body with a protruding head works with a steel mandrel that is pulled and broken off. The open end of the body leaves a small mandrel head visible, and installation uses a rivet tool with access only from the head side.

Key specifications

  • type: open-end blind rivet with break mandrel and protruding head,
  • standard: ISO 15979,
  • nominal size d × l: 6 × 20 mm,
  • body diameter d: 6 mm,
  • body length l: 20-21 mm,
  • head diameter dₖ: 12,6 mm,
  • head height k: max. 2,5 mm,
  • mandrel diameter dₘ: 3,7 mm,
  • note: the mandrel diameter dₘ is marked in the supplied data sheet as a dimension not covered by the standard,
  • minimum mandrel length p: 27 mm,
  • recommended grip range: 10-14 mm,
  • recommended hole diameter: 6,1-6,2 mm,
  • body material: steel St,
  • mandrel material: steel St,
  • sales unit: 1 pack = 250 pcs.

6x20 Open-end blind rivets ISO 15979, steel/steel - 250 pcs.

Installation

Before installation, make a hole of the appropriate diameter for the rivet and select the body length for the combined thickness of the components. Place the rivet in the hole, then break the mandrel using a rivet tool. For size 6 × 20 mm, the recommended grip range is 10-14 mm.

6x20 Open-end blind rivets ISO 15979, steel/steel - 250 pcs.

Scope of delivery and weight

One pack contains 250 open-end blind rivets ISO 15979 6 × 20 mm.

Indicative catalogue weight of the corresponding full pack of 250 pieces: 2,16 kg. This is the catalogue weight of this pack, not a weighing result from NERON.

  • Brand
  • Reference
    ISO15979-ST-ST-6X20-250
  • Waga
    2,16 kg
  • In stock
    3000 Items

  • Condition
    New
  • Standard
    ISO 15979
  • Sales unit
    pack
  • Quantity per pack
    250 pcs
  • Pack mass
    2,16 kg
  • Rivet type
    Open-end with break mandrel
  • Head type
    Domed
  • Body diameter d
    6 mm
  • Body length l
    20–21 mm (nominal 20 mm)
  • Head diameter dk
    12,6 mm
  • Head height k
    max. 2,5 mm
  • Stud diameter dm
    3,7 mm (dimension not covered by standard)
  • Minimum stud length p
    27 mm
  • Joining range
    10–14 mm
  • Bore diameter
    6,1–6,2 mm
  • Body material
    Steel St
  • Stud material
    Steel St

Workplace safety warnings — in accordance with Regulation (EU) 2023/988 on general product safety:
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.

Comments (0)

No customer reviews for the moment.

4 other products in the same category

Viewed products

Loading...
Back to top