6x12 Unhardened dowel pins ISO 2338 m6, stainless steel A1 - 5 pcs.

6x12 Unhardened dowel pins ISO 2338 m6, stainless steel A1 - 5 pcs.
Unhardened ISO 2338 dowel pins are used for locating, centring and joining machine parts, fixtures and tooling. ISO 2338 replaces the former DIN 7 standard. The solid cylindrical body has a diameter tolerance zone m6, and the gently rounded ends facilitate axial insertion at the start of assembly.
Key specifications
- type: unhardened dowel pin,
- standard: ISO 2338, equivalent to the former DIN 7,
- nominal size: 6x12 mm,
- nominal diameter d: 6 mm,
- length l: 12 mm,
- diameter tolerance zone: m6,
- material: austenitic stainless steel A1,
- surface finish: natural stainless steel finish, without additional coating,
- sales unit: 1 pack = 5 pcs.

Dimensions and properties
- d m6: 6 mm,
- l: 12 mm,
- c: approximately 1,2 mm,
- r: approximately 6 mm,
- A1 stainless steel hardness according to ISO 2338: 210-280 HV30,
- surface roughness for m6: Ra < 0,8 µm.
Insert the pin axially into a correctly machined hole. Final selection of the hole, fit and installation method should follow the engineering documentation for the joint.

Scope of delivery and weight
One pack contains 5 stainless steel dowel pins A1 ISO 2338 6x12 mm.
Calculated weight of the quantity sold: 0,013 kg (13 g). The value was calculated from the nominal volume of the 6x12 mm cylinder and stainless steel density of 7,90 g/cm³, multiplied by the number of pieces in the pack and rounded to the nearest whole gram required by the shop system.
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.

Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent