4,8x21x14 Blind rivets AN 381 Al/St large head 20 pcs.
Rivets AN 381 Al/St with large flat head. Size d × l × dk: 4,8 × 21 × 14 mm. Aluminium body, steel mandrel with white electroplated zinc. Grip range: To be confirmed; hole 4,9 mm. Pack of 20 pieces.

Rivets AN 381 with large head — 4,8 × 21 × 14 mm, Al/St, 20 pieces
Open-end rivets with break mandrels for joining components with installation access from one side. The body is made of Al aluminium alloy and the mandrel of St steel with white electroplated zinc. The large flat head has a diameter of 14 mm. AN 381 is the catalogue designation of this family.
Key parameters
- Standard: AN 381
- Rivet type: Open-end with break mandrel
- Head type: Large flat
- Body diameter d: 4,8 mm
- Body length l: 21 mm (nominally)
- Head diameter dk: 14 mm
- Head height k: max. 2,5 mm
- Mandrel diameter dm: 2,7 mm
- Minimum mandrel length p: 25 mm
- Grip range: To be confirmed
- Hole diameter: 4,9 mm
- Body material: Aluminium alloy Al
- Mandrel material: St steel
- Mandrel coating: White electroplated zinc

Selection and installation
Size 4,8 × 21 × 14 mm denotes, in order, body diameter d, nominal under-head body length l and head diameter dk. Grip range: To be confirmed. The relevant technical sheet gives no range for this length; it has not been calculated from adjacent variants. The recommended hole diameter is 4,9 mm. The minimum mandrel length p is 25 mm. The manufacturer recommends trials to determine setting parameters.

Scope of delivery and weight
Sales unit: one pack of 20 rivets AN 381 Al/St 4,8 × 21 × 14 mm. The price covers the entire pack.
Previously assigned weight for the sale quantity of 20 pieces: 0,15 kg. The value has been retained without recalculating the weight of the smaller pack.
The graphics show the product family and an illustrative pack; they do not document the exact piece count or the actual delivery carton. Dimensions and quantity are specified in the parameter table. The diagram provided here is a catalogue illustration and is not production documentation.
Frequently asked questions
How many rivets does the price cover?
The price covers one pack of 20 pieces.
What does size 4,8 × 21 × 14 mm mean?
The body diameter is 4,8 mm, the nominal under-head length 21 mm and the large head diameter 14 mm.
For what combined component thickness should this rivet be selected?
The grip range must be confirmed in the data for this variant. The recommended hole diameter is 4,9 mm. Setting parameters must be determined through trials.
What is the rivet made of?
The body is made of Al aluminium alloy, and the St steel mandrel has white electroplated zinc.
-
ConditionNew
-
StandardAN 381
-
Sales unitpack
-
Source referenceKAT48365_n
-
Quantity per pack20 pcs
-
Pack mass0,15 kg
-
Rivet typeOpen-end with break mandrel
-
Head typeLarge flat
-
Body diameter d4,8 mm
-
Body length l21 mm (nominal)
-
Head diameter dk14 mm
-
Head height kmax. 2,5 mm
-
Stud diameter dm2,7 mm
-
Minimum stud length p25 mm
-
Joining rangeTo be confirmed
-
Bore diameter4,9 mm
-
Body materialAluminium alloy Al
-
Stud materialSteel St
-
Stud coatingWhite electroplated zinc
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.

Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent