4,8x18 Open-end blind rivets ISO 15981 aluminium/aluminium 25 pcs.
Open-end blind rivets ISO 15981 4,8 × 18 mm, body and mandrel made of AlA aluminium alloy. Domed head. Grip range to be confirmed. Hole 4,9–5,0 mm. Sale: pack of 25 pieces.

Open-end blind rivets ISO 15981 — 4,8 × 18 mm, aluminium/aluminium, 25 pieces
Blind rivets with break mandrels are used to join components with installation access from one side. The rivet body and mandrel are made of AlA aluminium alloy. The rivet has an open body and a protruding, domed head. The body surface is uncoated, in its natural condition.
Key parameters
- Standard: ISO 15981
- Rivet type: Open-end with break mandrel
- Head type: Domed
- Body diameter d: 4,8 mm
- Body length l: 18 mm (nominally; length outside the technical sheet table)
- Head diameter dk: 8,3–10,1 mm
- Head height k: max. 2 mm
- Mandrel diameter dm: max. 3,05 mm
- Minimum mandrel length p: 27 mm
- Grip range: To be confirmed
- Hole diameter: 4,9–5,0 mm
- Body material: Aluminium alloy AlA
- Mandrel material: Aluminium alloy AlA
- Finish: Uncoated (natural condition)
- Minimum shear load: 1160 N
- Minimum tensile load: 1420 N
- Maximum mandrel break load: 3700 N

Selection and installation
The grip range for size 4,8 × 18 mm must be confirmed before selection — length 18 mm is not listed in the table of the relevant technical sheet. The clearance hole diameter is 4,9–5,0 mm. Select a tool and nosepiece suitable for rivets with aluminium mandrels.
The nominal length of 18 mm is confirmed by the relevant supplier variant sheet; it is absent from the technical sheet length table. No unconfirmed length tolerance or grip range has been added.
The stated loads are technical sheet values for this diameter and rivet family: minimum shear load 1160 N, minimum tensile load 1420 N and maximum mandrel break load 3700 N. They are neither test results for the specific batch delivered nor the calculated load capacity of the finished joint.

Scope of delivery and weight
Sales unit: one pack of 25 rivets 4,8 × 18 mm ISO 15981 aluminium/aluminium. The price covers the entire pack.
Previously assigned weight for the sale quantity of 25 pieces: 0,15 kg. The value has been retained without recalculating the weight of the smaller pack.
The graphics show the product family and an illustrative pack; they do not document the exact piece count or the actual delivery carton. Dimensions and quantity are specified in the parameter table. The diagram provided here is a catalogue illustration and is not production documentation.
-
ConditionNew
-
StandardISO 15981
-
Sales unitpack
-
Source referenceKAT34343_n
-
Quantity per pack25 pcs
-
Pack mass0,15 kg
-
Rivet typeOpen-end with break mandrel
-
Head typeDomed
-
Body diameter d4,8 mm
-
Body length l18 mm (nominal; length outside data sheet table)
-
Head diameter dk8,3–10,1 mm
-
Head height kmax. 2 mm
-
Stud diameter dmmax. 3,05 mm
-
Minimum stud length p27 mm
-
Joining rangeTo be confirmed
-
Bore diameter4,9–5,0 mm
-
Body materialAluminium alloy AlA
-
Stud materialAluminium alloy AlA
-
FinishUncoated (natural condition)
-
Minimum shear load1160 N
-
Minimum tensile load1420 N
-
Maximum mandrel breaking load3700 N
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.

Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent