3,5x16 Countersunk head wood screws PZ2 AN201, yellow zinc plating - 100 pcs.
Screws for wood and chipboard AN201 3,5×16 mm, yellow zinc plating. Flat countersunk head, Pozidriv PZ2 recess and pointed tip. Sales unit: 1 pack = 100 pcs.

Countersunk head Pozidriv wood screws AN201 3,5×16 mm
Steel screws with yellow zinc plating for fastening wooden components and chipboard. The flat countersunk head allows the head to sit in a suitably prepared surface. The Pozidriv PZ2 recess is driven with a matching bit; the coarse wood screw thread and pointed tip make inserting the screw easier.
- Diameter: 3,5 mm.
- Overall length including head: 16 mm.
- Material: steel.
- Coating: yellow zinc plating.
- Recess: Pozidriv PZ2.
- Sales unit: 1 pack = 100 pcs.

Technical specifications
- Product range designation: AN201.
- Nominal diameter d: 3,5 mm; wood screw thread.
- Length L, measured including the head to the tip: 16 mm.
- Head: flat countersunk.
- Head diameter dk: max. 6,9 mm.
- Head height k: max. 2,1 mm.
- Head angle: 90°.
- Cross-recess size: PZ2.
- Tip: pointed.
The stated head dimensions are reference values; actual execution may vary depending on the manufacturer.

Scope of delivery and weight
1 pack contains 100 pieces. Indicative weight for the sales quantity: 0,083 kg (83 g), calculated from a reference weight of 0,83 g/pc. for size 3,5×16 mm. Rounded to whole grams after multiplication by the sales quantity. This is an approximation based on an analogous zinc-plated steel screw; weight may depend on execution and coating.
-
ConditionNew
-
Sales unitpcs
-
Materialsteel
-
CoatingYellow zinc coating
-
Length [mm]16
-
Diameter [mm]3.5
-
Drive typePozidriv PZ2
-
Head shapeFlat countersunk
-
Product range designationAN201
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.

Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent