20x80 taper pins with internal thread DIN 7978 A, uncoated steel - 5 pcs.

20x80 taper pins with internal thread DIN 7978 A, uncoated steel - 5 pcs.
The ground taper pin with an internal thread is intended for accurate locating and joining of machine parts. The 1:50 taper facilitates centring and stable seating, while the internal thread allows the pin to be extracted from a blind hole.
Key specifications
- standard: DIN 7978 A (equivalent to ISO 8736 A),
- type: taper pin with internal thread, ground,
- size: 20x80 mm,
- nominal diameter d1: 20 mm, tolerance h10,
- nominal length l: 80 mm,
- taper: 1:50,
- internal thread d2: M12,
- thread length t1: 18 mm,
- minimum hole depth t2: 27 mm,
- hole diameter d3: 13 mm,
- dimension a: approximately 2,5 mm,
- material: steel,
- surface: uncoated,
- sales unit: 5 pcs..

Dimensions and application
The pin has a length of 80 mm and a nominal diameter of 20 mm. With a 1:50 taper, the diameter increases to approximately 21,6 mm over the nominal length. The internal thread M12 allows a suitable screw or tool to be used for removal. Prepare the mounting hole with a taper reamer and select the required fit to suit the joint design.

Scope of delivery and weight
The offer includes 5 taper pins DIN 7978 A 20x80 mm. A screw or tool for extracting the pin is not included in the delivery.
Calculated weight for the quantity sold: 0,951 kg (951 g). The value was calculated relative to the documented weight of variant 6x50 mm, accounting for the 1:50 taper, the hole for the thread and the number of pieces sold; the result was rounded to the whole gram required by the store system.
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.

Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent