Drawn S355 square bar 60 × 60 × 3000 mm — one piece — family illustration
Flat faces and solid square cross-section of an S355 bar — illustrative image
Cutting a solid square bar with a descending-arm bandsaw — illustrative image
Square bar diagram — sides a and length L

Drawn S355 square bar h11 60 × 60 × 3000 mm — 1 pc.

Neron
zł1,100.00 Grosszł894.31 Net

Solid bar square S355, drawn, 60 × 60 mm h11, length 3000 mm. The price covers 1 piece — one bar.

Family: drawn S355 square bars

Square cross-section (mm):

60 × 60 — selected 80 × 80

Length for 60 × 60 mm:

3000 mm — selected

Sales unit:

1 pcs. — selected

Selected: 1 bar 60 × 60 × 3000 mm. The price on this page covers one piece. A different cross-section opens a separate product page with its price and availability.

Dispatch within:
5 days
Shipping cost incl. VAT:
from zł615.00
Availability:
Available
Weight:
84,78 kg
Secure payments
BLIK Przelewy24

Delivery with our partners

InPost Paczkomaty GLS DHL Pocztex

Available options depend on the products and delivery address.

Share
Selection advice
Questions about a product? Send its code, dimensions or a photo — contact NERON. Delivery information
Ask about delivery for your chosen product, quantity and destination. Returns and complaints
Check the terms and download the return and complaint forms.

Drawn S355 square bar h11 — 60 × 60 × 3000 mm, 1 piece

Solid square bar made of S355 steel by drawing. The price covers one bar with sides of 60 × 60 mm and a length of 3000 mm.

Technical specifications

Product typeSolid square bar
MaterialSteel S355
DesignDrawn
Nominal cross-section dimensions60 × 60 mm
Nominal side a60 mm
Side a toleranceh11 — deviations +0 / −0,190 mm
Minimum side dimension59,810 mm
Maximum side dimension60,000 mm
Tolerance zone width0,190 mm (190 µm)
Length of one bar L3000 mm (300 cm)
Number of bars per sales unit1 piece
Purchase unit1 piece = 1 bar 60 × 60 × 3000 mm
Theoretical mass per metreapproximately 28,260 kg/m
Theoretical mass of the sales unitapproximately 84,780 kg
Length toleranceTo be confirmed when ordering

For side a = 60 mm in tolerance grade h11, the upper deviation es = 0 mm and the lower deviation ei = −0,190 mm. The permissible dimension between opposite flat faces is 59,810–60,000 mm. The tolerance applies to each side dimension of the cross-section; the bar length is agreed separately.

Lengths and sales units for 60 × 60 mm

The identified offer for this cross-section includes a length of 3000 mm and one piece per sales unit. A different length must be agreed with the store.

Bar lengthNumber of piecesMass of the sales unitSelect an offer
3000 mm1 pc.84,780 kg3000 mm · 1 pcs. — selected

Masses are theoretical, calculated from nominal dimensions and a steel density of 7850 kg/m³: m = a² × L × ρ × n, with dimensions a and L expressed in metres. The unit mass accounts for the number of pieces and is rounded to 0,001 kg. Values exclude packaging and are not weighing results.

Bar surface and cross-section

The graphic gives an indicative view of the flat faces of a drawn bar and the solid square cross-section. If sharp corners or a specific corner radius are required, agree this before purchase.

Flat faces and solid square cross-section of an S355 bar — illustrative image

Cut length dimensions

The symbol a denotes the side length of the square, and L the length of one bar. On this page, a = 60 mm, the cross-section a × a = 60 × 60 mm and L = 3000 mm. The diagram is illustrative and is not drawn to scale.

Square bar diagram — sides a and length L

S355 steel — material overview

S355 is a structural steel used for structural and machine components and for further machining. Drawing is a cold-working process. The specific subgrade, delivery condition and properties of a particular batch are defined by the material documentation.

Preparation and cutting

Contact the store for a different length. Confirm feasibility, cost and cutting tolerance before the order is processed.

Cutting a solid square bar with a descending-arm bandsaw — illustrative image

Standards and tolerances

The current reference for bright steel products made of non-alloy and alloy steels, including drawn products, is EN ISO 683-7:2024, adopted in Poland as PN-EN ISO 683-7:2025-04. The Polish standard replaces PN-EN 10277:2018-09.

The offered bar has the side dimension tolerance grade h11. In the ISO 286 system, for a side of 60 mm this means +0 / −0,190 mm. Side tolerance is separate from length tolerance and corner requirements.

The historical reference for dimensions, deviations and masses of bright square bars is DIN 178:1969-06, withdrawn and replaced by DIN EN 10278:1999-12. The scope of DIN EN 10278:2024-01 excludes non-alloy and alloy steels covered by EN 10277; therefore EN ISO 683-7 is indicated as the current reference for this group. Material documentation confirms whether a specific delivery complies with the product standard.

Product family — drawn S355 square bars

The table lists the identified offers for drawn S355 square bars. Both include a single bar of 3000 mm in length. Selecting an offer opens the page with the corresponding cross-section, price and current availability.

Cross-sectionLength and unitUnit massSelect an offer
60 × 60 mm3000 mm · 1 pc.84,780 kg3000 mm · 1 pcs. — selected
80 × 80 mm3000 mm · 1 pc.150,720 kg3000 mm · 1 pcs.

How to order

Purchasing 1 unit on this page means one bar of 60 × 60 × 3000 mm. Purchasing 2 units means two separate bars of this length. No separate pack offers were found in the identified family.

Order processing

Dispatch of an in-stock product: within 5 days. Delivery time depends on the carrier. If out of stock, availability must be confirmed.

Questions and answers

Is the cross-section solid?
Yes. This is a solid bar with a square cross-section of 60 × 60 mm.

What does the price cover?
One piece of 3000 mm in length.

What is the side dimension range?
From 59,810 to 60,000 mm in tolerance grade h11.

Does the mass cover the complete purchased unit?
Yes. The theoretical mass of one piece is approximately 84,780 kg, excluding packaging.

NERON Pila — help with selection

Contact NERON, specifying the steel grade, cross-section dimensions, length and number of bars.

  • Brand
  • Reference
    KAT10290-3000mm
  • Waga
    84,78 kg
  • In stock
    100 Items

  • Condition
    New
  • Standard
    PN-EN ISO 683-7:2025-04 (reference)
  • Sales unit
    pcs
  • Material
    Steel S355
  • Type
    Solid square bar
  • Length [mm]
    3000
  • Surface treatment
    Drawn
  • Number of pieces per sales unit
    1
  • Product width
    60 mm
  • Product height
    60 mm
  • Dimensional tolerances
    h11 — side 60 mm: +0 / −0,190 mm; 59,810–60,000 mm
  • Cross-section shape
    Square, solid

Workplace safety warnings — in accordance with Regulation (EU) 2023/988 on general product safety:
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.

Comments (0)

No customer reviews for the moment.

4 other products in the same category

Back to top