Hexagonal bar C45+C drawn h11 S46 × 1000 mm — 1 pcs.
Solid bar hexagonal C45+C, drawn, S46 mm h11, length 1000 mm. The price is for 1 piece. Theoretical mass of the entire unit: approx. 14,385 kg.
Family: drawn C45+C hexagonal bars
Width across flats: S46 mm — h11, 45,840–46,000 mm
Length: 1000 mm — selected
Sales unit: 1 pcs. — selected
One length and one sales unit were identified in this family.
Hexagonal bar C45+C drawn h11 — S46 × 1000 mm, 1 piece
Solid bar with a regular hexagonal cross-section in C45+C steel. The offer includes one bar with dimension S = 46 mm and length 1000 mm. The price is for one piece.
Technical specifications
| Product type | Solid hexagonal bar |
|---|---|
| Material | Steel C45+C |
| Condition designated +C | Cold-drawn |
| Nominal dimension S | 46 mm — across opposing flat faces |
| S tolerance class | h11 — deviations +0 / −0,160 mm |
| Minimum dimension S | 45,840 mm |
| Maximum dimension S | 46,000 mm |
| Tolerance zone width | 0,160 mm (160 µm) |
| Length of one bar L | 1000 mm (100 cm) |
| Number of bars per sales unit | 1 pcs. |
| Theoretical sales unit mass | approx. 14,385 kg |
| Length tolerance | To be confirmed when ordering |
Dimension S is the distance between opposing flat faces of the hexagon. It is the width across flats, not the distance between corners.
Lengths and sales units for S46 C45+C
The identified offer for this grade and dimension includes a 1000 mm length, one piece each. The variant below is currently selected.
| Bar length | Number of bars | Mass of the entire unit | Variant |
|---|---|---|---|
| 1000 mm | 1 pcs. | 14,385 kg | 1000 mm · 1 pcs. — selected |
C45+C steel — about the material
C45 is a non-alloy steel for quenching and tempering with a carbon content of approx. 0,45%, used for machine parts, axles and pins. +C denotes the cold-drawn condition. The properties achieved depend on delivery condition and subsequent treatment; detailed batch data are defined by material documentation.

Preparation and cutting
Cutting the bar into ordered sections can be agreed before purchase. State the required length, number of sections and cutting tolerance in your enquiry.

Section dimensions
S denotes the spacing of opposing flat faces of the hexagon and L bar length. On this card S = 46 mm, L = 1000 mm. The diagram is illustrative and not drawn to scale.

Standards and tolerances
The current reference for bright steel products in the drawn condition is PN-EN ISO 683-7:2025-04, adopting EN ISO 683-7:2024 and ISO 683-7:2023. It replaced PN-EN 10277:2018-09. Compliance of the specific batch is defined by delivery documentation.
The historical DIN 176:1972-02 for drawn hexagonal bars was withdrawn and replaced by DIN EN 10278:1999-12. The scope of DIN EN 10278:2024-01 changed: non-alloy and alloy steels covered by EN 10277 are no longer within its scope. For C45 we therefore indicate PN-EN ISO 683-7 as the current reference.
For dimension S46, class h11 is confirmed. The upper deviation es = 0 mm and lower deviation ei = −0,160 mm; the permitted dimension across opposing flat faces is 45,840–46,000 mm. The tolerance applies to dimension S; requirements for length and corners are agreed separately.
Sales unit mass
The theoretical mass follows from the area of a regular hexagon A = (√3/2) × S² and steel density 7850 kg/m³. For dimensions in millimetres m = (√3/2) × S² × L × 7,85 × 10⁻⁶ × n. One S46 × 1000 mm bar theoretically weighs approx. 14,385 kg. Mass excludes packaging and is not a weighing result.
How to order
Buying 1 unit means one S46 × 1000 mm bar. Buying 2 units means two separate bars, each 1000 mm long.
Order fulfilment
Dispatch of an in-stock product: within 5 days. Delivery time depends on the carrier. If there is no stock, availability must be confirmed.
Questions and answers
What does S46 mean?
A nominal 46 mm across opposing flat faces of the hexagon — the width across flats.
What does the price cover?
One S46 × 1000 mm bar.
What does +C mean?
The cold-drawn condition.
What is the tolerance range for S?
45,840–46,000 mm in class h11.
Is the mass for the entire unit?
Yes, 14,385 kg is the theoretical mass of one piece 1000 mm long, excluding packaging.
NERON Piła — help with selection
Contact NERON, stating steel grade, dimension S, length and number of bars.
-
ConditionNew
-
StandardPN-EN ISO 683-7:2025-04 (reference)
-
Sales unitpcs
-
MaterialSteel C45
-
TypeSolid hexagonal bar
-
Length [mm]1000
-
Surface treatmentDrawn
-
Number of pieces per sales unit1
-
Dimensional tolerancesh11 — dimension S 46 mm: +0 / −0,160 mm; 45,840–46,000 mm
-
Cross-section shapeHexagonal, solid
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.

Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent