Hot-rolled S355 flat bar 180 × 40 × 3000 mm — 1 pcs.
Solid hot-rolled S355 flat bar 180 × 40 mm, length 3000 mm. The price covers 1 piece. Theoretical mass of the entire unit: 169,560 kg. EN 10058 tolerances.
Family: hot-rolled S355 flat bars
Cross-section: 180 × 40 mm
Length for cross-section 180 × 40 mm:
3000 mm — selected
Sales unit: 1 piece. This family currently has an offer for 180 × 40 × 3000 mm. Ask about preparing other lengths.
Hot-rolled S355 flat bar — 180 × 40 × 3000 mm, 1 piece
Solid rectangular flat bar made of hot-rolled S355 steel. The offer covers one piece with a width of 180 mm, thickness of 40 mm and length of 3000 mm.
Technical specifications
| Parameter | Value |
|---|---|
| Product type | Solid flat bar |
| Material | S355 steel |
| Design | Hot-rolled |
| Nominal width a | 180 mm |
| Nominal thickness t | 40 mm |
| Width tolerance a | EN 10058: ±2,500 mm; range 177,500–182,500 mm |
| Thickness tolerance t | EN 10058: ±1,000 mm; range 39,000–41,000 mm |
| Length of one flat bar L | 3000 mm (300 cm) |
| Number of pieces per sales unit | 1 pcs. |
| Purchase unit | 1 piece = 1 flat bar 180 × 40 × 3000 mm |
| Theoretical mass per metre | 56,520 kg/m |
| Theoretical mass of the entire sales unit | approx. 169,560 kg |
| Length tolerance | To be agreed when ordering |
Lengths and sales units for 180 × 40 mm S355
The currently identified offer for this cross-section covers the length below. Other lengths and cutting require individual agreement.
| Length of one flat bar | Number of pieces | Theoretical mass of the entire unit | Selection |
|---|---|---|---|
| 3000 mm | 1 pcs. | 169,560 kg | 3000 mm — selected |
S355 steel — material overview
S355 is a non-alloy structural steel used for structural components and machine parts. A hot-rolled flat bar has a matt surface and may carry mill scale; it must be prepared appropriately before welding, painting or other finishing. The full grade variant, delivery condition and properties of the specific batch are determined by the delivery documentation.

Preparation and cutting
Cutting to ordered lengths can be agreed before purchase. In your enquiry, state length, number of sections and required cutting tolerance.

Section dimensions
The symbol a denotes flat bar width, t its thickness and L its length. On this card a = 180 mm, t = 40 mm and L = 3000 mm. EN 10058 uses the letter b for width. The end view shows the solid rectangular cross-section, and the side view shows length and thickness. The diagram is illustrative and not drawn to scale.

Standards and tolerances
Dimensions and shape tolerances for hot-rolled steel flat bars are specified in PN-EN 10058:2019-11, adopting EN 10058:2018. The Polish standard replaced PN-EN 10058:2005. The reference for technical delivery conditions of non-alloy structural steel S355 is PN-EN 10025-2:2019-11; conformity of the specific batch is determined by the delivery documentation.
The historical DIN 1017-1:1967-04 was withdrawn and replaced by DIN EN 10058:2004-02, which was superseded by DIN EN 10058:2019-02, implementing EN 10058:2018.
For the offered cross-section, manufacture to EN 10058 has been confirmed: width a = 180 mm has deviations of ±2,500 mm and a range of 177,500–182,500 mm; thickness t = 40 mm has deviations of ±1,000 mm and a range of 39,000–41,000 mm. The length tolerance for the ordered section must be agreed before purchase.
Mass of the sales unit
The theoretical mass follows from nominal dimensions and a steel density of 7850 kg/m³. For dimensions in millimetres: m = a × t × L × 7,85 × 10⁻⁶ × n. One 180 × 40 × 3000 mm flat bar has a theoretical mass of approx. 169,560 kg; one metre has a mass of 56,520 kg. Number of pieces: 1. The result for the entire unit is rounded to 0,001 kg. Mass excludes packaging and is not a weighing result.
Product family — hot-rolled S355 flat bars
Available cross-section in the identified family: 180 × 40 mm, length 3000 mm, one piece per sales unit.
How to order
Buying 1 unit means one 180 × 40 × 3000 mm flat bar. Buying 2 units means two separate flat bars, each 3000 mm long. Ask about cutting other lengths.
Order fulfilment
Dispatch of an in-stock product: within 7 days. Delivery time depends on the carrier. If out of stock, availability must be confirmed.
Questions and answers
Is the cross-section solid?
Yes, the flat bar has a solid rectangular cross-section 180 × 40 mm.
What does the price cover?
One piece 3000 mm long.
Are other lengths available?
The identified family currently has an offer for 3000 mm. Agree cutting options and other lengths before purchase.
What dimensions are permissible?
Width 177,500–182,500 mm and thickness 39,000–41,000 mm according to EN 10058.
Does the mass apply to the entire unit?
Yes, 169,560 kg is the theoretical mass of one 3000 mm piece, excluding packaging.
NERON Piła — help with selection
Contact NERON, stating the steel grade, cross-section, length and number of flat bars.
-
ConditionNew
-
StandardPN-EN 10058:2019-11; PN-EN 10025-2:2019-11 (reference)
-
Sales unitpcs
-
MaterialSteel S355
-
TypeSolid flat bar
-
Length [mm]3000
-
Surface treatmentHot-rolled
-
Number of pieces per sales unit1
-
Product width180 mm
-
Product height40 mm (thickness t)
-
Dimensional tolerancesEN 10058 — width a 180 mm: ±2,500 mm; 177,500–182,500 mm; thickness t 40 mm: ±1,000 mm; 39,000–41,000 mm
-
Cross-section shapeRectangular, solid
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.

Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent