| Valve function |
2 3/2-way valves, normally closed, monostable |
| Actuation method |
Electrical |
| Mounting width |
18 mm |
| Standard nominal flow rate |
400 l/min |
| Operating pressure |
3 ... 10 bar |
| Design |
Piston valve |
| Approval |
CSA (OL)
c UL us - Recognized (OL) |
| Degree of protection |
IP65
NEMA 4 |
| Exhaust function |
Throttling possible
Via flow-control plate
Via individual sub-base |
| Type of sealing |
Soft |
| Mounting position |
Any |
| Manual override |
Detenting
Non-detenting
With blanking cap |
| Control type |
Pilot-operated |
| Pilot air supply |
External
Internal |
| Flow direction |
Unidirectional |
| Overlap |
Positive overlap |
| Signal status display |
LED |
| Pilot pressure |
3 ... 10 bar |
| Valve flow rate |
600 l/min |
| Valve flow rate on individual sub-base |
500 l/min |
| Valve flow rate on flow-optimized valve terminal |
550 l/min |
| Valve flow rate on valve terminal |
400 l/min |
| Switch-off time |
30 ms |
| Switch-on time |
12 ms |
| Duty cycle |
100 % |
| Max. positive test pulse with logic signal 0 |
1700 µs |
| Max. negative test pulse with logic signal 1 |
1200 µs |
| Nominal operating voltage DC |
24 V |
| Coil characteristics |
24 V DC: 1,3 W |
| Surge withstand voltage |
2.5 kV |
| Pollution degree |
3 |
| Permissible voltage fluctuations |
+/- 10 % |
| Operating medium |
Compressed air to ISO8573-1:2010 [7:4:4] |
| Notes on the operating medium |
Operation with lubricated air is possible (once lubrication has been started, it is required for continued operation) |
| Vibration resistance |
Transport application test at severity level 2 in accordance with FN 942017-4 and EN 60068-2-6 |
| Shock resistance |
Shock resistance test, severity level 2 to FN942017-5 and EN60068-2-27 |
| Corrosion resistance class CRC |
0 – No corrosion resistance |
| Relative air humidity |
0 - 90 % |
| Pilot medium |
Compressed air to ISO8573-1:2010 [7:4:4] |
| Ambient temperature |
-5 ... 50 °C |
| Product weight |
190 g |
| Electrical connection |
Plug-in
To ISO 15407-2 |
| Mounting method |
On sub-base |
| Pilot supply connection 12/14 |
Sub-base, size 18 mm to ISO 15407-2 |
| Pilot exhaust connection 82/84 |
Selectable:
exhaust does not conform to the standard
ducted |
| Pneumatic connection 1 |
Sub-base, size 18 mm to ISO 15407-2 |
| Pneumatic connection 2 |
Sub-base, size 18 mm to ISO 15407-2 |
| Pneumatic connection 3 |
Sub-base, size 18 mm to ISO 15407-2 |
| Pneumatic connection 4 |
Sub-base, size 18 mm to ISO 15407-2 |
| Pneumatic connection 5 |
Sub-base, size 18 mm to ISO 15407-2 |
| Note on materials |
RoHS-compliant |
| Seal material |
FPM
HNBR
NBR |
| Housing material |
Die-cast aluminium
PA |
| Screw material |
Zinc-plated steel |
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent