| Actuator size |
20 |
| Flange hole pattern |
F04 |
| Swivel angle |
90 deg |
| End-position adjustment at 0° |
-5 ... 5 deg |
| End-position adjusting range at nominal swivel angle |
-5 ... 5 deg |
| Connecting shaft, depth |
12 mm |
| Standardised valve connection |
ISO 5211 |
| Mounting position |
Any |
| Mode of operation |
Double-acting |
| Design |
Rack/pinion |
| Closing direction |
Clockwise closing |
| Valve connection conforms to standard |
VDI/VDE 3845 (NAMUR) |
| Connection for positioner and position sensor conforms to standard |
VDI/VDE 3845 Size AA 1 |
| Component suitable for safety functions |
Safety device |
| Safety function |
Execute working stroke in defined time |
| Safety Integrity Level (SIL) |
The product can be used in SRP/CS up to SIL 2 Low Demand
Up to SIL 3 in redundant architecture
up to SIL 1 High Demand mode |
| Certified for safety functions according to ISO 13849 and IEC 61508 (SIL) |
The product can be used in SRP/CS up to SIL 2 Low Demand
up to SIL 1 High Demand mode
Up to SIL 3 in redundant architecture |
| Operating pressure MPa |
0.2 ... 0.8 MPa |
| Operating pressure |
2 ... 8 bar |
| Operating pressure |
29 ... 116 psi |
| Nominal operating pressure |
0.55 MPa |
| Nominal operating pressure |
5.5 bar |
| Nominal operating pressure (psi) |
79.75 psi |
| Marine classification |
see certificate |
| CE mark (see declaration of conformity) |
According to the EU explosion protection directive - (ATEX) |
| Certificate |
DNVGL TAP00001CE
TÜV Rheinland 968/V 1106.00/19 |
| ATEX category, gas |
II 2G |
| ATEX category, dust |
II 2D |
| Ex explosion protection, gas |
Ex h IIC T4 Gb X |
| Ex explosion protection, dust |
Ex h IIIC T105°C Db X |
| Ex ambient temperature |
-20°C <= Ta <= +80°C |
| Operating medium |
Compressed air to ISO8573-1:2010 [7:4:4] |
| Notes on the operating medium |
Pressure dew point 10°C below ambient/medium temperature
Operation with lubricated air is possible (once lubrication has been started, it is required for continued operation) |
| Corrosion resistance class CRC |
2 – Moderate corrosion resistance |
| Storage temperature |
-20 ... 60 °C |
| Ambient temperature |
-20 ... 80 °C |
| Torque at nominal pressure and swivel angle 0° |
20.1 Nm |
| Torque at nominal operating pressure and swivel angle 90° |
20.1 Nm |
| Note on torque |
The operating torque of the actuator must not exceed the maximum permissible torque specified in ISO 5211 for the mounting flange and coupling size. |
| Mean Time to Failure dangerous (MTTFd) |
1126 years |
| Probability of failure per hour in [1/h]. |
1.01 * 10-07 |
| PFD (Probability of Failure on Demand) |
1.42 * 10-03 |
| Air consumption at 0.6 MPa (6 bar, 87 psi) per cycle 0°-nominal swivel angle-0° |
1.8 l |
| Product weight |
1275 g |
| Shaft connection |
T11 |
| Pneumatic connections |
G1/8 |
| Material note |
RoHS-compliant |
| Connection plate material |
Aluminium alloy, anodized |
| Cover material |
Cast aluminium, protective coating |
| Seal material |
NBR |
| Housing material |
Aluminium alloy, anodized |
| Piston material |
Die-cast aluminium |
| Bearing material |
POM |
| Cam material |
Cast high-grade steel |
| Screw material |
High-alloy stainless steel |
| Shaft material |
Steel, nickel-plated |
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent