Foam 750 ml TYTAN ecological O2 ergo all-season
Foam 750 ml TYTAN ecological O2 ergo all-season
Tytan Professional STD mounting foam cures through moisture and is recommended for a wide range of
construction applications: mounting, sealing, filling and insulation. Thanks to a modern chemical
formulation, the foam does not run off vertical surfaces and is multi-position – it can be dispensed
“valve up” – and all-season, for both summer and winter work.
The cured product provides excellent thermal and sound insulation.
The foam resists mould, fungi and high and low temperatures (-60oC to +100oC).
Once cured, the foam can be cut, sandblasted, plastered or painted. Its modern applicator allows
reuse up to 60 days after the first application, with even greater convenience and comfort at work.
It enables precise foam dispensing even into hard-to-reach places, and the foam can be held
with just one hand during dispensing. High-quality Tytan Professional STD mounting foam with ERGO applicator
is manufactured to ISO 9001:2000.
Multi-position - application in hard-to-reach places possible “valve up”
Reuse up to 60 days after the first application. All-season – suitable for winter and summer work
Ergonomic applicator – providing greater comfort at work and more precise, convenient application
no MDI emissions – greater safety at work. New valve generation - a system preventing valve blockage
and gas leakage. High yield - up to 45 l (750 ml). Low-expansion formula. Resistance to the formation of
mould and fungi. “Ozon-friendly” means the product contains no freons - gases of the type
Chloro-Fluoro-Carbon (CFC and HCFC)
Technical parameters
Colour: light yellow. Application temperature: from -10°C to +30°C
Can temperature: from +5°C to +30°C
Post-expansion: 160-200 %
Skin formation time: >10 min +23°C, 50% RH
Initial processing time: ?60 min +23°C, 50% RH
Full curing time: 24 h +23°C, 50% RH
Thermal resistance (after curing): -60°C to +100°C
Dimensional stability (shrinkage): <5 %
Water absorption after 24h of partial immersion without skin: <1 (kg/m2)
Thermal conductivity: 0,036 W/mK
Flammability class: F/B3
Solvents (before curing):
TYTAN Professional cleaner. Yield *: 33 – 45 l (750ml) / 21 – 27 l (500ml)
* maximum free-foaming yield measured under optimum conditions (EN 291).
The final result depends largely on foam lost through excessive application, can temperature,
application, surface, equipment quality and the skills of the person dispensing the foam.
-
ConditionNew
-
Sales unitpcs
-
BrandTytan Professional (2)
-
Pack volume [ml]750
1. Eye protection:
– Always wear safety goggles or a face shield to protect your eyes from sparks, particles and metal fragments.
2. Hearing protection:
– When working in a noisy environment, use ear defenders or earplugs to prevent hearing damage.
3. Respiratory protection:
– When working in dusty surroundings or in the presence of fumes, wear a filtering mask or an appropriate respirator.
– Ensure proper ventilation of the workstation.
4. Hand and skin safety:
– Use protective gloves that protect against mechanical injuries and chemicals.
– Where necessary, use protective creams to prevent irritation and dry skin.
5. Work clothing:
– Work in protective clothing resistant to sparks and splashes.
– Avoid loose clothing, jewellery and loose hair near machinery.
6. Fire risk:
– Keep the workstation free of flammable materials (e.g. paper, fabrics and chemicals).
– Keep a serviceable fire extinguisher close at hand and know how to use it.
7. Electrical hazards:
– Check the condition of cables and electrical equipment before use.
– Do not use electrical devices in damp conditions.
– Disconnect equipment from the power supply during maintenance or repairs.
8. Use of machinery and tools:
– Regularly inspect the technical condition of machines and tools.
– Use equipment in accordance with the manufacturer's instructions.
– Blades and tools should be maintained regularly and kept in good condition.
– Machines should be fitted with appropriate guards and protective devices.
9. Handling materials:
– Use handling equipment to move heavy components.
– Lift and carry using ergonomic practices to avoid injury.
10. Working with chemicals:
– Store chemicals in labelled, safe containers.
– Use substances in accordance with the manufacturer's instructions and occupational health and safety rules.
– Ensure air circulation when using chemicals.
Other important rules:
– Keep the workstation clean and tidy.
– Ensure adequate lighting in the working area.
– Provide occupational health and safety training.
– Carry out regular safety audits and comply with current regulations.

Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent