Hot-rolled S235 flat bar — 40 × 5 × 2000 mm, 1 piece
Solid rectangular flat bar made of hot-rolled S235 steel. The offer covers one piece with a width of 40 mm, thickness of 5 mm and length of 2000 mm.
Technical specifications
| Parameter | Value |
|---|
| Product type | Solid flat bar |
| Material | S235 steel |
| Design | Hot-rolled |
| Nominal width a | 40 mm |
| Nominal thickness t | 5 mm |
| Width tolerance a | EN 10058: ±0,750 mm; range 39,250–40,750 mm |
| Thickness tolerance t | EN 10058: ±0,500 mm; range 4,500–5,500 mm |
| Length of one flat bar L | 2000 mm (200 cm) |
| Number of pieces per sales unit | 1 pcs. |
| Purchase unit | 1 piece = 1 flat bar 40 × 5 × 2000 mm |
| Theoretical mass per metre | 1,570 kg/m |
| Theoretical mass of the sales unit | approx. 3,140 kg |
| Length tolerance | To be agreed when ordering |
Lengths and sales units for 40 × 5 mm S235
Select the flat bar length. Each offer below covers one piece. Some lengths have more than one offer; on the opened card, check price, surface condition and availability.
| Length of one flat bar | Number of pieces | Theoretical mass of the entire unit | Select an offer |
|---|
| 500 mm | 1 pcs. | 0,785 kg | 500 mm · 1 pcs. |
| 1000 mm | 1 pcs. | 1,570 kg | 1000 mm · 1 pcs. |
| 1500 mm | 1 pcs. | 2,355 kg | 1500 mm · 1 pcs. |
| 2000 mm | 1 pcs. | 3,140 kg | 2000 mm · 1 pcs. — selected |
S235 steel — material overview
S235 is a non-alloy structural steel used for structural components and general-purpose parts. A hot-rolled flat bar has a characteristic matt surface that may carry mill scale. Depending on the application, the surface can be prepared for welding or corrosion protection. The full grade variant, delivery condition and properties of the specific batch are determined by the delivery documentation.
Preparation and cutting
Cutting to ordered lengths can be agreed before purchase. In your enquiry, state the required length, number of sections and cutting tolerance.
Section dimensions
The symbol a denotes flat bar width, t its thickness and L its length. On this card a = 40 mm, t = 5 mm and L = 2000 mm. EN 10058 uses the letter b for width. The end view shows the solid rectangular cross-section, and the side view shows length and thickness. The diagram is illustrative and not drawn to scale.
Standards and tolerances
Dimensions and shape tolerances for hot-rolled steel flat bars are specified in PN-EN 10058:2019-11, adopting EN 10058:2018. The Polish standard replaced PN-EN 10058:2005. The reference for technical delivery conditions of non-alloy structural steel S235 is PN-EN 10025-2:2019-11; conformity of the specific batch is determined by the delivery documentation.
The historical DIN 1017-1:1967-04 was withdrawn and replaced by DIN EN 10058:2004-02, which was superseded by DIN EN 10058:2019-02, implementing EN 10058:2018.
For the offered cross-section, manufacture to EN 10058 has been confirmed: width a = 40 mm has deviations of ±0,750 mm and a range of 39,250–40,750 mm; thickness t = 5 mm has deviations of ±0,500 mm and a range of 4,500–5,500 mm. The length tolerance for the ordered section must be agreed before purchase.
Mass of the sales unit
The theoretical mass follows from nominal dimensions and a steel density of 7850 kg/m³. For dimensions in millimetres: m = a × t × L × 7,85 × 10⁻⁶ × n. One 40 × 5 × 2000 mm flat bar has a theoretical mass of approx. 3,140 kg. Number of pieces: 1. The result for the entire unit is rounded to 0,001 kg. Mass excludes packaging and is not a weighing result.
Product family — hot-rolled S235 flat bars
Select width a and cross-section a × t from the identified hot-rolled S235 offers. Check length and sales unit on the selected card.
How to order
Buying 1 unit means one 40 × 5 × 2000 mm flat bar. Buying 2 units means two separate flat bars, each 2000 mm long. Select another length from the available 40 × 5 mm offers.
Order fulfilment
Dispatch of an in-stock product: within 5 days. Delivery time depends on the carrier. If out of stock, availability must be confirmed.
Questions and answers
Is the cross-section solid?
Yes, the flat bar has a solid rectangular cross-section 40 × 5 mm.
What does the price cover?
One piece 2000 mm long.
How can I select a different length?
Use the length buttons in the short description or the 40 × 5 mm offers table.
What dimensions are permissible?
Width 39,250–40,750 mm and thickness 4,500–5,500 mm according to EN 10058.
Does the mass apply to the entire unit?
Yes, 3,140 kg is the theoretical mass of one 2000 mm piece, excluding packaging.
NERON Piła — help with selection
Contact NERON, stating the steel grade, cross-section, length and number of flat bars.
